Buffer Solutions
-
Phosphate Buffered Saline-Tween (20X, with 2% Tween-20, pH 7.4)
Boston BioProductsComponents: Sodium Phosphate Dibasic(202 mM), Potassium Phosphate Monobasic(35.2 mM), Potassium Chloride(54 mM), Sodium Chloride(2.74 M), Tween-20(2%) Method: Prepared in 18.2 megohms-cm ± 1 water and autoclaved at 15 psi (121°C) for 30 minutes on liquid cycle. pH: 7.4 ±…
-
Composition: Water 96.47%, Formic Acid 3.10%, Sodium Hydroxide 0.44% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 2.9 Solubility Information: Miscible Shelf Life: 12 Months Storage:…
-
Elution Buffer
Omega Bio-tekElution Buffer. 10 mM Tris-HCl pH 8.5 For Research Use Only. Not for use in diagnostic procedures.
-
Buffer Tablets, pH 7.2
MilliporeSigmaPhosphate buffer solutions are used in hematology, for the dilution of staining solutions and for the rinsing steps in the staining process. The buffer tablets acc. to Weise will produce a buffered solution (pH6.4/pH6.8/pH7.2) that stabilizes the staining result and gives reproducible staining…
-
-
10X Phosphate Buffered Saline Solution
IBI ScientificIBI’s Ultra-Pure Grade 10X PBS solution is ideal for use in sample preparations and as a wash buffer in general immunoassay applications. 10X PBS also performs very well in tissue and cell culture procedures. IBI’s 10X PBS solution is a modified Dulbecco buffer that does not contain…
-
-
Buffer Solution (Borate), pH 10 (Color Coded Blue), BAKER ANALYZED Reagent
Avantor - J.T.Baker®Formula: Mixture
-
Potassium Phosphate, Monobasic, ACS Grade
RPI (Research Products International)Potassium Phosphate, Monobasic, ACS Grade
-
Fluka Sodium hydroxide solution volumetric, 5.0 M NaOH (5.0N)
Honeywell Research ChemicalsChemical name: Sodium hydroxide Product Brand: Analytical Material form: Solution Density (g/cm3): 1.327 Molecular weight: 40 Molecular formula: HNaO Chemical purity: =99.0% UN Number: UN 1824
-
HEPES, Sodium Salt
Bio Basic Inc.HEPES, sodium salt: HEPES, sodium salt This product is designated as Biotechnology Performance Certified (BPC) reagent grade and meets the specifications of the USP, EP, and JP for reagent chemicals. In addition, this product can be used for molecular biology, cell culture, and electrophoresis…
-
10X TE pH 7.5 (100 mM Tris HCl 10 mM EDTA) DEPC TREATED, 1L, Liquid (sterile…
Rockland Immunochemicals IncThis product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 100 mM Tris HCl and 10 mM EDTA at a pH of 7.5. Meticulously prepared using ultra pure reagents dissolved in…
-
Optimum Results Filling Solutions
Thermo Scientific OrionFor use with ionplus® Sure-Flow® ISE electrodes Little or none of the ion of interest present helps prevent sample contamination Application-specific solution formulation improves response time Small temperature coefficients reduce electrode potential shifts from changing…
-
-
pH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Multiple sizes to fit your usage and budget constraints. All combined in one of the most comprehensive…
-
InLab Storage Solution
Mettler ToledoThe Mettler Toledo InLab storage solution finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment…
-
Water Concentrating Buffer
Zymo Research CorporationWater Concentrating Buffer allows for the effective concentration of DNA and RNA from microbes, fungi, and viral particles. Especially helpful to concentrate larger volumes up to 5 mL of water by adding Water Concentrating Buffer.
-
HEPES Buffer (1 M, pH 8.0)
Boston BioProductsComponents: HEPES(1 M), Sodium Hydroxide(for pH adjustment), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 8.0 ± 0.15 Storage: 2-8°C
-
Manganese Chloride 1M Solution
RPI (Research Products International)Manganese Chloride is used for dC and dG tailing of DNA.
-
Buffer solution, pH 2.00±0.01 @ 25°, colorless, NIST traceable
BeanTown ChemicalMDL No: MFCD00146252 Liquid
-
NORMAL HORSE SERUM (NHS), 10mL, Lyophilized
Rockland Immunochemicals IncHorse serum is suitable for blocking, western blotting, IP and for ELISA. Researchers should determine optimal titers for applications that are not stated below.
-
-
Calibration, Maintenance & Cleaning Solutions
Milwaukee InstrumentsMilwaukee offers a wide range of calibration, maintenance & cleaning solutions. The use of calibration and cleaning solutions is fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Often readings are not correct because the sensors have not…
-
Bicine Buffer (0.5 M, pH 7.5)
Boston BioProductsComponents: Bicine(500 mM), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 7.5 ± 0.15 Storage: 2-8°C
-
RPI TRIS Buffered Saline
RPI (Research Products International)The RPI tris buffered saline is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Research or Further Manufacturing use only
-
pH Buffers
YSIVarious pH buffers for pH probe calibration. Buffer cases are available with a single buffer type or with an assortment of buffers (2 pints of pH 4, 7, and 10 buffers).
-
TRUEscience Color-Coded pH Buffer Solutions
TRUEscienceIdeal for use with TRUEscience SMART pH Cap, these pH buffers are color coded and QR coded for ease of identification using the TRUEscience App. Available in pH 4, 7 and 10 and are calibrated at 20°C / 68°F. Temperature dependence data is printed on the label as are the lot numbers. …
-
Tris-HCl Buffer (1.0 M, pH 8.5, 0.2 Micron Filtered)
Boston BioProductsComponents: Tris Base / Tris-HCl(1 M), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 8.5 ± 0.2 Storage: 2-8°C
-
20X SSPE Buffer (3.0 M Sodium Chloride, 0.2 M Sodium Hydrogen Phosphate, 0.02 M…
Rockland Immunochemicals IncThis product is a 20X concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 3.0 M Sodium Chloride, 0.2 M Sodium Hydrogen Phosphate, 0.02 M EDTA at a pH of 7.4. Meticulously prepared…
-
Tris-HCl Buffer (1.0 M, pH 6.8, 0.2 Micron Filtered)
Boston BioProductsComponents: Tris Base / Tris-HCl(1 M), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 6.8 ± 0.2 Storage: 2-8°C
-
-
FREUND'S COMPLETE ADJUVANT
Rockland Immunochemicals IncFreund’s adjuvant may be used to form water-in-oil emulsions with antigens for the injection of immunogens for antibody production. Proper emulsion formation is essential and should be tested by observing a drop of the emulsion on the surface of water which should 'bead and not disperse. Antigens…