Balance Accessories

Compare Tool

Select up to 3 products

HomeAll Products

Balance Accessories

1 - 32 of 111
Sort
View
Show
  • Anti-Vibration Granite Platform for Balances

    labForce® (a Thomas Scientific Brand)

    Granite platform featuring anti-vibration isolation to provide stabilization to Thomas Scientific balances in environments where vibrations may affect weighing perfomance. This platform is suitable for loades up to 70lbs and features high grade silicone gel vibration isolators. Platform size: 13 x…

  • Stainless Steel Anti-Vibration Table

    labForce® (a Thomas Scientific Brand)

    Antivibration table with granite insert to aid in measurement stability. The table is fully constructed from stainless steel. The table features adjustable leveling feet to aid in stabilization of the table.

  • Balance Tables

    Gawet Marble & Granite

    Consists of three massive rectangular slabs of marble, 3 inches thick, braced by a powder-coated steel pipe Overall dimensions 35 x 24 x 31 inches high Because of weight, table will be shipped directly from quarry, F.O.B. Center, Rutland, VT. CAUTION: Intended location must…

  • Mild Steel Anti-Vibration Table

    labForce® (a Thomas Scientific Brand)

    Antivibration table with granite insert to aid in measurement stability. The base construction is powder coated steel with a HPL board top. The table features adjustable leveling feet to aid in stabilization of the table.

  • Disposable Aluminum Pans

    labForce® (a Thomas Scientific Brand)

    Disposable aluminum pans for use with the TS-M Moisture Analyzers. Pack of 50.

  • Marble Slab

    Gawet Marble & Granite

    Standard Hone Mat Finish, for use on laboratory table to reduce vibration Overall dimensions 20 x 13 x 2 inches thick; weight: 60 lbs. Shipped directly from quarry, F.O.B. Center, Rutland, VT.

  • Anti-Static Ionizer

    labForce® (a Thomas Scientific Brand)

    Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 268 x 100 x 295mm.

  • PRNT-01 Dot Matrix Printer with Interface Cable

    labForce® (a Thomas Scientific Brand)

    Easily obtain results from your Thomas Scientific Balance utilizing the PRNT-01 Dot Matrix Printer. The printer includes the needed interface cable to easily obtain results at a press of a button.

  • Anti-Static Ionizer

    labForce® (a Thomas Scientific Brand)

    Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 175 x 70 x 172mm.

  • Density Determination Kit for Thomas Scientific Balances

    labForce® (a Thomas Scientific Brand)

    Density Determination Kit for use in determinig density of solids and liquds. This kit is compatible with the following Thomas Scientific balances: TS-T-2102.C TS-L-1202.C TS-L-2102.C

  • Display Cover for TS-T Series Balances

    labForce® (a Thomas Scientific Brand)

    Protective plastic cover to protect the TS-T and TS-M Series display against scratches, dust, or spills. Comes in pack of 3.

  • Applications Printer

    Mettler Toledo

    The RS-P28 Compact Printer delivers GxP-compliant printouts on regular, adhesive or lightfast paper. The ergonomic design makes operation easy and allows tarring and printing of the balance directly from the printer. The RS-P28 is extended with the Statistics and the Totaling application. …

  • Printer Paper for PRNT-01

    labForce® (a Thomas Scientific Brand)

    Replacement paper for PRNT-01 Dot Matrix Printer. Package of 3 replacement rolls.

  • Display Cover for TS-L Series Balances

    labForce® (a Thomas Scientific Brand)

    Protective plastic cover to protect the TS-L Series (4500g and 6000g capacity) balance housing from scratches, dust or spills. Comes in pack of 3.

  • Accessory for the Mettler Toledo ™ LC-P43 and the BT-P42 (wireless) printer. Self-adhesive paper 3 rolls

  • Display Cover for TS-L and TS-PH Series Balances

    labForce® (a Thomas Scientific Brand)

    Protective plastic cover to protect the TS-L Series (1200g and 2100g capacity) and TS-PH Series balance housing from scratches, dust or spills. Comes in pack of 3.

  • Sample Holder for 50, 100, 250 mL Round Flasks

    labForce® (a Thomas Scientific Brand)

    Sample Holder for 50, 100, 250 mL Round Flasks. For use with the following Thomas Scientific balances: TS-T Series (0.01mg or 0.1mg readability) TS-L Series (0.01mg or 0.1mg readability)

  • Density Determination Kit for Thomas Scientific Balances

    labForce® (a Thomas Scientific Brand)

    Density Determination Kit for use in determinig density of solids and liquds. This kit is compatible with the following Thomas Scientific balances: TS-T Series (1mg readability) TS-L Series (1mg readability)

  • OHAUS Value in a Full-Featured, Portable Printer The all-new SF40A combines high performance and multiple functions to offer OHAUS quality and durability in a portable printer. The SF40A offers advanced functionality in an easy-to-use and set up printer at an exceptional value. This versatile…

  • Sample Holder 8,10,12mm dia. Test Tubes and Centrifuge Tubes

    labForce® (a Thomas Scientific Brand)

    Sample Holder 8,10,12mm dia. Test Tubes and Centrifuge Tubes. For use with the following Thomas Scientific balances: TS-T Series (0.01mg or 0.1mg readability) TS-L Series (0.01mg or 0.1mg readability)

  • Low profile enclosure keeps powders, particulates and fumes contained for user protection Deep 23" interior easily accommodates large micro and analytical balances Rear baffle with zones of perforations promotes horizontal laminar airflow to maximize containment Tempered safety…

  • The YDK03 density determination kit can be used with the following balances: Secura® , Quintix® , Practum® with readability of 1 mg or 0.1 mg BSA balances with readability of 0.1 mg CPA balances with readability of 0.1 mg Entris balances with readability of 0.1 mg

  • Resolution: 203 dpi Line voltage: 24V Weight: 2.6 lbs Dimensions (WxDxH): 4.9 x 7.9 x 4.9 inches Power supply: DC 24V, 1.5A Communication: USB

  • Density Determination Kit for Thomas Scientific Balances

    labForce® (a Thomas Scientific Brand)

    Density Determination Kit for use in determinig density of solids and liquds. This kit is compatible with the following Thomas Scientific balances: TS-T Series (0.01mg or 0.1mg readability) TS-L Series (0.01mg or 0.1mg readability)

  • Cubis Data Printer Model YDP 10-0CE is a data printer designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm). Text and data are printed with up to 24 characters per line. The data printer meets the quality standards for…

  • Ensure a Perfect Start Installation and setup of new equipment are the most critical moments to set the stage for worry-free use. To achieve peak performance and compliance with quality systems and regulatory requirements you need to take the right steps at the beginning of equipment use. …

  • Troemner offers a comprehensive line of Weight Cases and Accessories for all of your weight care and handling needs. Storage and shipping cases are available for your individual weights and weight sets as well as custom cases. Accessories include forceps, lifters, forks, brushes and gloves. …

  • Replacement Printer Ribbon

    labForce® (a Thomas Scientific Brand)

    Replacement printer ribbon for PRNT-01

  • Thermal Printers P-50

    Mettler Toledo

    P-56RUE Thermal Printer The robust P-56 universal printer offers a multitude of printing possibilities to help you to eliminate transcription error, speed up your working processes and ensure traceability. In contrast to dot matrix printers, which are often noisy, this thermal printer is…

  • Service life cycle management is a critical element when purchasing your equipment. It does not matter what industry you are in, pharma, biopharma, university, or food & beverage; proper life cycle management starts with the proper installation of the equipment and basic user training, which is…

  • Display Cover for TS-L Series Balance

    labForce® (a Thomas Scientific Brand)

    Protective plastic cover to protect the TS-L Series (1mg readability) balance housing from scratches, dust or spills. Comes in pack of 3.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.