Balance Accessories

Compare Tool

Select up to 3 products

HomeAll Products

Balance Accessories

1 - 32 of 119
Sort
View
Show
  • Stainless Steel Anti-Vibration Table

    labForce (a Thomas Scientific Brand)

    Antivibration table with granite insert to aid in measurement stability. The table is fully constructed from stainless steel. The table features adjustable leveling feet to aid in stabilization of the table.

  • Balance Tables

    Gawet Marble & Granite

    Consists of three massive rectangular slabs of marble, 3 inches thick, braced by a powder-coated steel pipe Overall dimensions 35 x 24 x 31 inches high Because of weight, table will be shipped directly from quarry, F.O.B. Center, Rutland, VT. CAUTION: Intended location must…

  • Anti-Vibration Granite Platform for Balances

    labForce (a Thomas Scientific Brand)

    Granite platform featuring anti-vibration isolation to provide stabilization to Thomas Scientific balances in environments where vibrations may affect weighing perfomance. This platform is suitable for loades up to 70lbs and features high grade silicone gel vibration isolators. Platform size: 13 x…

  • The YDS01SQP draft shield can be installed on the following weighing instruments: Secura, Quintix or Practum balances with a readability of 10 mg, 0.1 g or 1 g

  • Isolate instruments from disturbing vibrations Two convenient sizes Absorb vibration down to 9 Hz Molded of dense black and white terrazzo, with four Vibro-Absorber™ cushions and neoprene feet, damping mount absorbs even the slightest vibrations. Supports up to 35 lbs.…

  • Anti-Static Ionizer

    labForce (a Thomas Scientific Brand)

    Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 268 x 100 x 295mm.

  • The YDK03 density determination kit can be used with the following balances: Secura® , Quintix® , Practum® with readability of 1 mg or 0.1 mg BSA balances with readability of 0.1 mg CPA balances with readability of 0.1 mg Entris balances with readability of 0.1 mg

  • Resolution: 203 dpi Line voltage: 24V Weight: 2.6 lbs Dimensions (WxDxH): 4.9 x 7.9 x 4.9 inches Power supply: DC 24V, 1.5A Communication: USB

  • Marble Slab

    Gawet Marble & Granite

    Standard Hone Mat Finish, for use on laboratory table to reduce vibration Overall dimensions 20 x 13 x 2 inches thick; weight: 60 lbs. Shipped directly from quarry, F.O.B. Center, Rutland, VT.

  • Mild Steel Anti-Vibration Table

    labForce (a Thomas Scientific Brand)

    Antivibration table with granite insert to aid in measurement stability. The base construction is powder coated steel with a HPL board top. The table features adjustable leveling feet to aid in stabilization of the table.

  • Printer Paper for PRNT-01

    labForce (a Thomas Scientific Brand)

    Replacement paper for PRNT-01 Dot Matrix Printer. Package of 3 replacement rolls.

  • In-Use Base Covers

    Sartorius

  • Cubis Data Printer Model YDP 10-0CE is a data printer designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm). Text and data are printed with up to 24 characters per line. The data printer meets the quality standards for…

  • Granite Platforms

    Sartorius

    Stabilizes weighing results against environmental vibrations.

  • QP1 The Pharma software application package contains applications concerning the topic compliance with pharmaceutical-relevant guidelines as 21 CFR Part 11 and USP 39, Chapter 41. The Pharma package includes applications such as user management, digital signatures, audit trail, USP minimum…

  • Sample Holder for 50, 100, 250 mL Round Flasks

    labForce (a Thomas Scientific Brand)

    Sample Holder for 50, 100, 250 mL Round Flasks. For use with the following Thomas Scientific balances: TS-T Series (0.01mg or 0.1mg readability) TS-L Series (0.01mg or 0.1mg readability)

  • Anti-vibration Table

    Adam Equipment

    The Adam Equipment Anti-Vibration Table is designed for use in the laboratory or metrology room to provide suitable working conditions for devices that are sensitive to vibrations and shocks.

  • Service life cycle management is a critical element when purchasing your equipment. It does not matter what industry you are in, pharma, biopharma, university, or food & beverage; proper life cycle management starts with the proper installation of the equipment and basic user training, which is…

  • Troemner offers a comprehensive line of Weight Cases and Accessories for all of your weight care and handling needs. Storage and shipping cases are available for your individual weights and weight sets as well as custom cases. Accessories include forceps, lifters, forks, brushes and gloves. …

  • Service life cycle management is a critical element when purchasing your equipment. It does not matter what industry you are in, pharma, biopharma, university, or food & beverage; proper life cycle management starts with the proper installation of the equipment and basic user training, which is…

  • Compact Printer

    Mettler Toledo

    The Mettler RS-P25 Compact Printer eliminates the possibility of transmission errors. Recording data in laboratory or production journals by hand is time-consuming and a source of errors. These records verify the source of all data, so it can be reconstructed and filed away at any time while…

  • Ergoclips

    Mettler Toledo

    1228Z88 ErgoClip helps to perfectly position volumetric flasks of 1-10 mL. It allows directly dosing into the desired tare container. Dosing in directly means avoiding transfer errors, thus precious substances can be saved. 1228Z89 ErgoClip helps to perfectly position several tubes (test…

  • Display Cover for TS-L Series Balances

    labForce (a Thomas Scientific Brand)

    Protective plastic cover to protect the TS-L Series (4500g and 6000g capacity) balance housing from scratches, dust or spills. Comes in pack of 3.

  • The YDK04 density determination kit can be used with the following balances: Secura® Type 1102, 2102, 3102, 5102 Quintix® Type 612, 1102, 2102, 3102, 5102 Practum® Type 612, 1102, 2102

  • PRNT-01 Dot Matrix Printer with Interface Cable

    labForce (a Thomas Scientific Brand)

    Easily obtain results from your Thomas Scientific Balance utilizing the PRNT-01 Dot Matrix Printer. The printer includes the needed interface cable to easily obtain results at a press of a button.

  • Technical Specifications Cable length: 1m Environment temperature: 0 – 75°C Environment humidity: 5 – 95%

  • Anti-Static Ionizer

    labForce (a Thomas Scientific Brand)

    Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 175 x 70 x 172mm.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.