Several different Radiello cartridge adsorbents are available. Each of which are specific for sampling different classes of compounds. The dimensions for each cartridge are 60 mm L x 4.8 or 5.8 mm D. Each cartridge is designed for one time use with the exception of Radiello thermal desorption (TD)…

The Agilent Technologies ADM flow meter replacement cartridge with assessment, is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Available in three different sizes Mixed packing bed prevents improper installation Easily refillable Tested to 150 psi (helium) Both inlet and outlet connectors are equipped with stainless steel frits to prevent particulates from entering the gas stream. Indicating 4Å…

Our GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Oxygen/moisture adsorbents team up to give you two functionalities in the same trap Optimized for maximum surface area and capacity Leak-free, one-piece design (tested to 2000 psi) Bed material treated with ultra-high purity helium Filter design: prevents channeling, promotes efficient…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent GC fittings and GC nuts for instrument plumbing are available in brass, stainless steel, and UltiMetal Plus, and in sizes ranging from 1/16 to 1/4 inch. Application: For Gas Clean Connecting Unit This product is only available to U.S. Domestic Customers. For research use only, not…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Our innovative BPE-DNPH cartridge is a dual-bed cartridge device designed for sampling of carbonyls in ambient, indoor and industrial atmospheres. Like traditional DNPH sampling devices, carbonyls (e.g. formaldehyde) are trapped onto our high purity 2,4-dinitrophenylhydrazine (LpDNPH) coated silica…

The Agilent Technologies 2-stage regulator is suitable for use with CGA350 model. Application: For CGA350, w/o Fitting This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

ORBO(TM) 555 LpDNPH 300/150 mg sorbent tubes (W,W,W separators, O.D. x L. 6 mm x 105 mm) contain two beds of the same selective adsorbent separated by glass wool or foam, for gas and vapor sampling. The dual-layer or two-bed construction of the tube allows for any sample breakthrough to be captured…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies upper part of gas clean connecting unit is suitable for use in chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The design of the S10 cartridge makes it easy to use in the field and laboratory. Reusable adaptors are available for connecting the cartridge to the sampling pump. The built in reservoir eliminates the need to attach a syringe for sample extraction/elution. Storage: 2-8C Application: …

The Agilent Technologies ADM flow meter replacement cartridge is suitable for use with chromatography system models. Application: For ADM Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies gas clean filter tube is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent GC fittings and GC nuts for instrument plumbing are available in brass, stainless steel, and UltiMetal Plus, and in sizes ranging from 1/16 to 1/4 inch. Application: For Gas Clean Connecting This product is only available to U.S. Domestic Customers. For research use only, not to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies inline regulator is suitable for use with SCD models. Application: For SCD This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies FID adapter is designed to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies NPD adapter is compatible to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies ECD adapter is designed to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies tube is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The design of the S10 cartridge makes it easy to use in the field and laboratory. Reusable adaptors are available for connecting the cartridge to the sampling pump. The built in reservoir eliminates the need to attach a syringe for sample extraction/elution. Storage: 2-8C Legal Information: …

Agilent Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Several different Radiello cartridge adsorbents are available. Each of which are specific for sampling different classes of compounds. The dimensions for each cartridge are 60 mm L x 4.8 or 5.8 mm D. Each cartridge is designed for one time use with the exception of Radiello thermal desorption (TD)…

Our GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…