Plastic syringes without needles Sterile, designed for single use Non-toxic; non-pyrogenic Clear barrel with bold scale markings Offered in three luer tip styles, all of which take 8956A48 series disposable needles. Syringe capacity is plainly marked on wrapper. 1195R79,…

KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout…

For use with syringe filters No rubber or synthetic plunger gaskets No silicone oil lubricant Luer-Slip or Luer Lok® fittings Two-part, all plastic syringes have polypropylene barrels and either polypropylene or polyethylene plungers for a wide range of chemical…

PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…

Clear plastic hinged case for convenient storage and transportation of sample vials Polycoated partitions protect vials from abrasion and breakage Alphanumeric index card provides for easy vial identification Extra partitions and index cards can be purchased separately

For situations when luer lock needle systems are required or preferred, Sol-Millennium Medical introduces the SOL-CARE™ luer lock safety syringe. This product is designed with an integrated safety feature which retracts the needle back into the barrel. Tthe plunger can then be broken off to…

The PreciseDose Dispenser™, MEDISCA’s line of branded syringes, is an FDA-registered medical device manufactured in an ISO 13485 facility. These oral and topical syringes are designed uniquely for the compounding industry. With quality in mind, these syringes were tested against…

Highly resistant to most reagents Soluble in hydrofluoric acid Withstands temperatures up to 900°C Low form crucible is 0.89 mm thick zirconium. Will begin to oxidize with prolonged exposure to air at temperatures above 550°C. Not recommended for use with fluoboric or…

Polypropylene tubes and O-ring seal caps Excellent clarity Extra long cap skirt for ease of manipulation Withstand speeds up to 17,000 rpm Autoclavable Locking base on free-standing styles Available in plain or graduated configuration, the latter being provided with a…

Low-Binding Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Low binding tubes fit all standard…

NORM-JECT® syringes are latex free, contain no rubber, no silicone oil, styrene or DEHP and are DNA free. These syringes are the choice for any situation needing an inert, non-reactive syringe. Because of their composition they are indicated for Nuclear Medicine, Amniocentisis, IVF,…

Axygen® 2.0mL Self Standing, Screw Cap Tubes feature screw caps that provide a tight secure seal. Will withstand up to 20,000 RCF Screw cap contains O-rings to assure efficient sealing and avoid evaporation Certified RNase-/DNase-free and nonpyrogenic for total sample integrity

Pre-scored to eliminate filing Clear ampules are made from low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Amber ampules are made from amber borosilicate glass that conforms to USP Type I requirements for light transmission to protect…

•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…

Choose from high form, conical and cylindrical 99.8% Al₂O₃ Withstands temperatures up to 1,750°C Uses covers Useful for determinations involving molybdenum, platinum, rhodium, tungsten, tantalum and iridium.

• For determining the amount of dilution in engine crankcase oils when gasoline has been used as the fuel • Graduated from 0 to 5 mL in 1/10 mL divisions • With Standard Taper 24/40 inner joint at bottom • For ASTM Standard D 322; ANSI method Z11.29; API standard 524; and Federal Test Method…

Sturdy, economical, and convenient racks for samples stored in vials. Autoclavabale at 120°C for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom.

KD Scientific offers a line of disposable Plastic Sterile Syringes for all Scientific applications. Available in sizes ranging from 1ml to 50ml Luer Slip (LS) or Luer Lock (LL) tip. Norm-Ject syringes are the ideal solution for any situation. Their unique two-part system is latex free and contains…

NORM-JECT syringes are latex-free, contain no rubber, no silicone oil, styrene or DEHP and are DNA-free. These syringes are the choice for any situation needing an inert, nonreactive syringe. Because of their composition, they are ideal for chromatography and many other laboratory procedures. They…

Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…

This CoorsTek® AD-998 High-Alumina labware circular dish is made of 99.8%-pure aluminum oxide. It is highly resistant to chemical attack. This alumina-ceramic ware is especially useful to chemists, metallurgists, and others involved in high-temperature work demanding contamination-free results.…

Certified RNase/DNase and DNA Free.

1228T24: Protection sleeve for 0.3 & 0.5 mL Syringe Barrels 1228T25: Protection sleeve for 1 mL Syringe Barrels 1228T26: Protection sleeve for 2 mL Syringe Barrels 1228T27: Protection sleeve for 5 mL Syringe Barrels 1228T28:…

HSW Soft-Ject® syringes are a high quality disposable rubber piston syringe offering substantial savings. A lubricated synthetic rubber tipped piston allows for smooth draw while a positive stop prevents accidental pullout. These syringes are ETO gas sterilized and are latex and pyrogen free.…

For lab use only.

Numerous tube & cap options to form an ideal combination for specific applications, assembled for your convenience. Manufactured from high-clarity, ultra-pure polypropylene (meets FDA 21 CFR 177.1520 & USP Class VI). Suitable for a wide range of temperatures—from -196°C…

MTC Bio’s SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample…

These polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No…

These polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No…

Features: •   Sterile, single-use and bulk packaged syringes for pre-filling and batch filling procedures •   Not manufactured with DEHP or natural rubber latex

Crystal-clear polymer facilitates visualization of samples Rated to 20,000 x G Graduations at every 100 μL for easy volume estimation Temperature range: -80°C to +121°C Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Sterile product…

Natural Low Retention Microtubes, Phenix Brand, 250/Unit, PP, Certified RNase/DNase and DNA Free. This tube is not boil-proof.