10 mL, Glass
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
Serological Pipets, Shorty Glass Pipets
DWK Life Sciences (Kimble)Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
-
Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …
-
-
Calibrated "to deliver" Large tip opening to allow more rapid intake and delivery of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded
-
For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton- plugged Markings removed by dichromate cleaning solution
-
Distilling Traps
Corning• For determining the amount of dilution in engine crankcase oils when gasoline has been used as the fuel • Graduated from 0 to 5 mL in 1/10 mL divisions • With Standard Taper 24/40 inner joint at bottom • For ASTM Standard D 322; ANSI method Z11.29; API standard 524; and Federal Test Method…
-
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
PYREX Micro Volumetric Flasks
CorningMicrovolumetric Class A flasks are individually serialized and supplied with a Certificate of Identification and Capacity. Flasks are designed for microchemical work in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. To…
-
These PYREX VISTA Class A graduated cylinders are calibrated either “to contain” (TC) or “to deliver” (TD), and have blue enamel graduations. The cylinder capacity is in accordance with ASTM E-1272. The 10mL size has a funnel top.
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
-
These PYREX® Class A graduated cylinders are calibrated "to contain" (TC) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Corning Certificate of Identification and Capacity, traceable to NIST standards. Useful as a mixing…
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
Pycnometer, 10 mL
DWK Life Sciences (Kimble)Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…
-
These reusable PYREX® pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total…
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123