1000 mL, Flasks
-
Polycarbonate Erlenmeyer Flasks
CorningDisposable flasks feature wide, easily accessible mouths All flasks have Sterility Assurance Level (SAL) of 10 -6 Non-binding Wide, easy access mouth Made from optically clear polycarbonate Sizes from 125 mL to 1 L Certified non-pyrogenic Non-baffled bottoms Certified…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
PYREX VISTA flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The flat bottom boiling flasks are designed to ASTM E-1403.
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
PYREX Erlenmeyer Shaker Flask
CorningDelong style Extra deep baffles These PYREX Delong style shaker culture flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is…
-
Magna Flex™ Microcarrier Spinner Flasks
DWK Life Sciences (Wheaton)The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
KIMAX Dissolution Flask
DWK Life Sciences (Kimble)Capacity 1000 mL, 108 mm o.d. x 165 mm high Precision-formed borosilicate glass flask for determining the relative dissolution characteristics of drugs in capsule or tablet form. Flasks are suitable for use with most existing equipment.
-
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
PYREX Vacuum Filter Flask
CorningFor use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing
-
Thomas Combustion Flask Replacements and Accessories
labForce® (powered by Thomas Scientific)6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height
-
Thomas-Schoniger Replacement Combustion Flasks
labForce® (powered by Thomas Scientific)Conical, of heavy-wall borosilicate glass All sizes have Standard Taper 34/28 ground joints and bell-shape lip 65 mm wide x 30 mm deep. 500 mL flask is 195 mm high: 1,000 mL flask, 230 mm. Without stopper or platinum carrier.