1000 mL
-
PES Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2…
-
Tall form Beaker with Borosilicate glass spout and graduated as per DIN 12231, ISO 3819 Eisco Labs Borosilicate glass has the following heat tolerance Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
KIMAX Squibb Separatory Funnels With Glass Stopper
DWK Life Sciences (Kimble)Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel
-
PYREX Vacuum Filter Flask
CorningFor use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing
-
Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings. Glass beads indicate full capacity line. Permanent white enamel…
-
Griffin Beakers
GSC International, Inc.Our Griffin Beakers are made from quality, heat-resistant borosilicate glass, and have a reinforced rolled rim and even wall thickness. They are made so that the smaller sizes will nest inside the large sizes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals…
-
Jug Beakers
GSC International, Inc.Our Beaker Jugs are large, polypropylene graduated containers with handles. We carry capacities from 500ml to 5000ml. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.
-
Nylon Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
Transluscent polypropylene graduated cylinders are manufactured with raised graduations at the primary scale points. Cylinders have a hexagonal base and are calibrated "to contain" (TC). Tolerances according to ISO 6706. Exposure to temperatures above 60°C may affect accuracy.
-
Griffin Style Plastic Beakers
United Scientific SuppliesBeakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. Griffen style beakers next without sticking together.
-
Low form beakers with spout, made of borosilicate glass, graduated as per ASTM-E960. Eisco Labs Borosilicate glass has the following heat tolerances Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
Roux Culture Bottle
CorningOffset neck is tool-finished for increased strength and uniform stopper fit; uses number 5 rubber stopper Useful for growing mass cultures and single or monolayer cultures Will withstand repeated sterilization (wet or dry) Capacity 1,000 mL Stacks for easy storage
-
Chemware® PTFE Griffin Beakers
Saint GobainChemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…
-
Jacketed Beakers
SP Wilmad-LabGlassMade of borosilicate glass, these laboratory beakers are fully jacketed to allow temperature control over a wide range. They are similar to a standard Griffin Beaker, but do not have a pouring spout.
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
United Scientific™ BEAKERS, WIDE SPOUT, PP
United Scientific SuppliesBeakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.
-
Griffin Beakers - PP
labForce® (powered by Thomas Scientific)Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…
-
ValueWare® Beakers, Low Form, Heavy Duty
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
VITLAB Griffin Beaker, polypropylene (PP)
BrandTech®Griffin beakers in polymethylpentene (PMP), polypropylene (PP) and ethylene tetrafluoroethylene (ETFE). Choose PMP for glass-like clarity, ETFE for extreme chemical resistance and PP for general purpose use. Beakers are screened with approximate volumes.
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
SFCA Bottle Top Filters
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
Plastic Separatory Funnels
Thermo Scientific NalgenePolyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…