Conical
-
15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes…
-
-
These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…
-
ClearSeal™ Screw-Cap Microtubes
MTC BioClearSeal™ sterile screwcap microtubes come in a variety of sizes, cap configurations, graduation options, and even a loop-cap option for the 2.0mL. Made from ultra-clear polypropylene, these screwcap microtubes include assembled caps with silicone O-rings that assure a leakproof seal from…
-
Graduated Microcentrifuge Tubes
Thomas®Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…
-
15 mL Centrifuge Tubes with Caps
Caplugs Evergreen®Our 95kPa compliant 15 mL Centrifuge Tubes with screw caps are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 mL intervals from…
-
0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…
-
Cryogenic Vials
CorningPolypropylene construction withstands temperatures down to -196°C Sterilized by gamma radiation Certified non-pyrogenic Non-pyrogenic vials are ideal for use cryogenic workstations, racks and trays and come in a variety of capacities. Internal and external thread vials are…
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
EZ Flip™ Conical Centrifuge Tubes
Thermo Scientific NuncHinged flip cap for single-handed opening Chemical-resistant Leakproof Sterile EZ Flip™ Conical Centrifuge Tubes feature a patented closure system that allows one-handed opening and closing without compromising aseptic conditions. Manufactured to exacting tolerance,…
-
These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie
-
Conical Bottom Centrifuge Tubes
SP Bel-ArtChemical and corrosion resistant Conical bottom 15ml polyethylene tubes with rim Molded in graduations Useful for refrigerated use and continuous temperatures up to 52°C (125°F) Capacity: 15ml O.D.: 17mm Length: 117mm
-
Adapter Conical 1 X 50ml A-4-38 Pk2
EppendorfRound bucket centrifuge tube adapter for 50mL Falcon® centrifuge tubes. Adapter is for use with the Eppendorf® swing-bucket rotor (A-4-38) for centrifuges 5702/5702 R/5702 RH Tube has a conical bottom that fits 1 tube per adapter; 4 tubes per rotor Adapter diameter is…
-
Centrifuge Tubes
United Scientific SuppliesPolypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…
-
50 mL Centrifuge Tubes and Caps
Caplugs Evergreen®50 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport. …
-
PYREX Micro Tubes (Corning 8061)
CorningGraduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm
-
Corning® polypropylene (PP) centrifuge tubes are ideal for applications requiring large volume centrifugation. Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene…
-
Tube, Centrifuge, Oil, 100ml
DWK Life Sciences (Kimble)KIMAX tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating…
-
Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale…
-
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
MaxiRCF™ Trace Metal Free Centrifuge Tubes
United Scientific SuppliesManufactured using high-purity, virgin USP Class VI Medical grade polypropylene, these centrifuge tubes are free from natural rubber and heavy metal and conform to US FDA 21 CFR. Include leak-proof threaded HDPE caps that are free of added colorings and trace metals. A large, white marking spot…
-
Sterile 30 mL Centrifuge Tubes with Caps
Caplugs Evergreen®30 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens.The 30 mL tube with spork is also widely used in parasitology specimen transport. Polypropylene…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…
-
Tube 10 ml
CorningThese 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …
-
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…
-
15mL Unthreaded Centrifuge Tubes
Caplugs Evergreen®15 mL Unthreaded Centrifuge Tubes are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 mL intervals from 0-1 mL and at 0.5 mL…
-
2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…