Pre-Cut Peel-Off Round Labels for Microcentrifuge Tube Tops Tough-Spots are chemically inert and flexible white and colored polyolefin labels that adhere to most plastics as well as glass and metals. These labels withstand temperatures from +100°C to -196°C (vapor and liquid…

Specially designed sheets readily accept laser printing Heat-resistant, stay-flat sheets will not jam in printer Chemically inert polyester Will not dry up or fall off Easy to write on and smear-resistant Laser Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators,…

Pre-cut, peel-off, labels sized to fit microcentrifuge tubes Tubes with tags slide easily in and out of rotors Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Microcentrifuge Tube Tough-Tags withstand steam-autoclaving, boiling…

Durable - Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable Super Insulating - Preserves ice up to 30% longer than conventional ice pans Stackable - Designed with an inner edge enabling the pans to stack on top of one another for easy…

Label Size: 1.28" x 0.50" with 0.375" spot (33mm x 13mm with 9.5mm spot) Ideal Use: 1.5ml tubes Sheet Layout: 4 sets across - 17 sets down Labels/Sheet: 68 sets Color: White U of M: 1,360/pack

Designed for 0.2ml tubes (strips or trays), 96-well and 384-well microplates, 0.5ml, 1.5ml, 5ml tubes Cool Bricks maintain a constant temperature (1°C or -10°C) for up to 10 hours Aluminum Cool Chamber surrounds tubes to guarantee sustained cold temperatures The…

Labels for Moist, Frosty or Frozen Surfaces "Grips" to wet, frost-covered and frozen surfaces Temperature resistant to -80°C Compatible with centrifuge rotors Resistant to chemicals and solvents Adheres to plastics, glass, metals and even paperboard boxes …

100% Plant-Based Planet-Safe® Petri dishes from Diversified Biotech are made from polylactic acid (PLA), a biodegradable and compostable resin derived from a variety of non-GMO renewable resources such as sugar beets, sugarcane and corn. Superior Cell-Binding PLA bioresin is…

Cryogenic labels (Cryo-Babies are the small sizes and Cryo-Tags are the larger), are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic…

Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Teeny Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without…

The 80-well Chamber is a solid, anodized aluminum block sized to fit 1.5ml microtubes. An excellent temperature conductor for use with hot plates and ice buckets. It measures 8.25 x 2.625 x 1.25 inches. NOTE: Does not fit CoolSafe System; use separately

Breathe-EASIER (a white non-woven rayon membrane) transmits water vapor 6 times faster than Breathe-EASY for accelerated growth. Membranes are ideal for cell growth, concentrating samples (e.g. freeze drying), and gas exchange. Easy microtube cap closure. Will not bind in centrifuge rotors. …

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…

Durable and thick (4.4mil) yet easily pierced with a pipet tip Prevents well-to-well contamination, sample spillage and evaporation Polyethylene film that provides excellent adhesion to plastic microplates Non-cytotoxic, sterile, solvent resistant and waterproof Stays solidly in place…

No adhesive residue: completely dissolves in any temperature water Environmentally safe: 100% bio-degradable and FDA compliant Temperature resistant: store at room to moderate freezer temperatures Laser printable: readily accepts laser printing for quick and easy labeling

Permeable and inert Reusable after cleaning Can be cut to size with scissors Can be used as a permeable stacking spacer and support for gels during stain and destain procedures Polypropylene mesh is approximately 1/3 mm thick with 1 mm strand spacings and approximately 70% void volume. This…

Printed diagonal stripes darken indicating a steam autoclave process is complete. Stripes darken after 5 minutes of exposure at 273°F (134°C) at steam pressure of 1.02 kg/cm 2 .

For Easy Pipetting and Identification of Samples in Microplates A thin, plastic card that slips under the well plate, providing sharp, alpha-numeric characters to identify each sample in a 96-, 48-, or 24-well microplate. No more cross-referencing headaches! Multi-Color Well…

Cryo-Tags from -196°C to 80°C For Use with Thermal Transfer Printers Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance Specially coated for use with a resin ribbon that provides the best performance under extreme conditions …

Top loading Secure Cutting edge The Tough-Tags Station securely holds up to six standard size boxes of Tough Tags. It's top loading so users can easily insert rolls or remove empty boxes. A specially designed top rail holds tags securely in place. Built-in cutting edge allows easy liner…

Ideal use: 1.5ml tubes Will not jam in printer Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam laser printers. Durable labels are made of a flexible polyolefin material and use an acrylic adhesive that…

100% Biodegradable  - Proprietary fabric is formulated to easily break down over time. Green  - Re-sealable and flexible packaging has a low carbon footprint. No Residue  - 70% IPA/30% H₂O mixture evaporates completely Lint-Free  - Wipes won't…

Stickers for labeling petri dishes PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing…

Gel Drying Frames allow researchers to quickly and easily dry gels between two sheets of cellophane without the use of expensive heat/vacuum gel dryers. The 24 x 24cm frames allow for drying of larger format gels, while the 14 x 14cm frames are ideal for mini gels and other smaller formats.

Chemically inert polyester Will not dry up or fall off Easy to write on Smear-resistant Sidewall Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling.…

Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both! TEMPERATURE-RESISTANT - From -196°C to 70°C and also…

Tough-Spots are chemically inert and flexible white and colored polyolefin labels that adhere to most plastics as well as glass and metals. These labels withstand temperatures from +100°C to -196°C (vapor and liquid phase nitrogen storage, up to moderate oven temperatures) and can…

Gas permeable sealing membranes for microtubes Multiple uses Thermal and chemical stability Centrifuge compatible Gamma irradiated Breathable Breathe-Easy and Breathe-Easier microtube sealing membranes offer two rates of gas exchange to meet your requirements for cell…

Strong, durable, oil & abrasion resistant, waterproof, and non-staining Great for general identification and color coding Temperature Range: -23° to +121°C Accepts marking using pen, pencil, or permanent marker Stick to most surfaces including glass, plastic, and metal …

Cryo-Tags microplates are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). Labels will resist water soaking for at least 24 hours at room temperature and water vapor (100% relative humidity) at 35°C…

A convenient holder for a microplate, tilted at a 30° angle to comfortably view samples and pipette without strain. Each stand has a neoprene pad and rubber mounting to prevent slippage of the plate and stand.