Ready to Ship, 10.0 ml
-
Serological Pipets
Celltreat ScientificNEW – Now available in 100mL size for large volume pipetting Peel-to-open plastic/plastic wrappers are the ideal option for eliminating particulate; proven benefit over traditional paper/plastic wrapper Wrappers reduce static cling versus other brands of plastic wrap pipets All…
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Griffin Style Plastic Beakers
United Scientific SuppliesBeakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. Griffen style beakers next without sticking together.
-
Tall Form Berzelius Beakers without Spout
DWK Life Sciences (Kimble)Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.
-
Tri-Stir Beakers
Dyn-A-MedDisposable graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three…
-
Lab Disposable Beakers
Biomedical PolymersBeakers offer ±5% accuracy All beakers are transparent for clear content visibility and graduated for easily estimating volumes Molded-in pouring spout and rolled-lip creates a dripless working environment Beakers are constructed of polypropylene and are resistant to most commonly used…
-
PYREX Brand Hydrometer Cylinders
CorningBreakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops
-
Chemware® PTFE Griffin Beakers
Saint GobainChemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
Tri-Pour PP Beaker
United Scientific SuppliesThese disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
KIMAX Kjeldahl Flasks
DWK Life Sciences (Kimble)Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Griffin Beakers - PP
labForce® (powered by Thomas Scientific)Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…
-
Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.
-
Sub Surface Grab Sampler® II
DWK Life Sciences (Wheaton)Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers
-
Bain Marie Type Beakers
Polarware CompanySeamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.
-
Transluscent polypropylene beakers printed with blue graduations.
-
1000 Series Gastight Syringes
HamiltonTeflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for…
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
Beakers HDPE
DynalonExtra heavy wall Low form Molded of FDA Approved high density polyethylene resin. These heavy walled graduated beakers are slightly tapered to allow nesting. Each beaker features two properly formed spouts which assist in pouring and preventing dripping.
-
Alumina Crucibles
CoorsTekChoose from high form, conical and cylindrical 99.8% Al2O3 Withstands temperatures up to 1,750°C Uses covers Useful for determinations involving molybdenum, platinum, rhodium, tungsten, tantalum and iridium.
-
Griffin Beakers - Low Form, PMP, Molded Graduations
Globe ScientificThese superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…
-
United Scientific™ BEAKERS, WIDE SPOUT, PP
United Scientific SuppliesBeakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.
-
Medicine Cup, Polypropylene Disposable Beaker, Clear, 100 ml
Consolidated PlasticsTranslucent beakers are resistant to strong acids and bases, organic solvents, and commonly used laboratory reagents. Autoclavable beakers have excellent temperature resistance (250oF). The beakers are molded with a special "dripless" lip.
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
Color-coded magnifying stripe Anti-drip tip Paper/plastic wrap Lot numbers printed on each pipet wrapper Accuate to ±2% at full volume Cleanroom pack style Cleanroom pack style offers an inner dust cover liner for the carton as well as a second sealed sleeve over each…
-
Griffin Beakers - Low Form, PMP, Blue Printed Graduations
Globe ScientificThese superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…
-
Paper/plastic wrap allows easy opening by either pop-through or peel-apart techniques. It is also ideal for sterile tissue culture applications, especially while wearing latex gloves, as the wrap reduces static cling. Color-coding on paper allows easy size identification. Paper/plastic…