Ready to Ship, 10.0 ml
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
PYREX Brand Hydrometer Cylinders
CorningBreakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops
-
Tri-Stir Beakers
Dyn-A-MedDisposable graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three…
-
Tri-Corner Plastic Beaker, Polypropylene, Economy Style
Globe ScientificThese tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Polypropylene…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
Sub Surface Grab Sampler® II
DWK Life Sciences (Wheaton)Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
Paper/plastic wrap allows easy opening by either pop-through or peel-apart techniques. It is also ideal for sterile tissue culture applications, especially while wearing latex gloves, as the wrap reduces static cling. Color-coding on paper allows easy size identification. Paper/plastic…
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
Tall Form Berzelius Beakers without Spout
DWK Life Sciences (Kimble)Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.
-
KIMAX Kjeldahl Flasks
DWK Life Sciences (Kimble)Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.
-
Medicine Cup, Polypropylene Disposable Beaker, Clear, 100 ml
Consolidated PlasticsTranslucent beakers are resistant to strong acids and bases, organic solvents, and commonly used laboratory reagents. Autoclavable beakers have excellent temperature resistance (250oF). The beakers are molded with a special "dripless" lip.
-
Tri-Pour PP Beaker
United Scientific SuppliesThese disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Glass Beaker, Low Form
United Scientific SuppliesOur beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.
-
1000 Series Gastight Syringes
HamiltonTeflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for…
-
Chemware® PTFE Griffin Beakers
Saint GobainChemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
Serological Pipets
Celltreat ScientificNEW – Now available in 100mL size for large volume pipetting Peel-to-open plastic/plastic wrappers are the ideal option for eliminating particulate; proven benefit over traditional paper/plastic wrapper Wrappers reduce static cling versus other brands of plastic wrap pipets All…
-
Tri-Pour Beakers
Medegen Medical ProductsTri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.
-
Transluscent polypropylene beakers printed with blue graduations.
-
Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers
-
Beakers HDPE
DynalonExtra heavy wall Low form Molded of FDA Approved high density polyethylene resin. These heavy walled graduated beakers are slightly tapered to allow nesting. Each beaker features two properly formed spouts which assist in pouring and preventing dripping.
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
Polystyrene, disposable pipets for tissue culture, bacteriological, and research applications Sterile RNase-/DNase-free Noncytotoxic, nonpyrogenicity tested to less than 0.1 EU/mL BSE/TSE-free…
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
Diamond® Essentials™ Griffin Style Beakers, Low Form, Polypropylene
Globe ScientificDiamond® Essentials™ Griffin Style Beakers meet the demands for mixing, pouring, stirring, and measuring solutions in many laboratory operations. Available in economic polypropylene (PP) or crystal clear Polymethylpentene (PMP), these beakers are the safe, shatterproof alternative to…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
Glass Beaker, Tall Form
United Scientific SuppliesOur Berzelius (tall form) beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is…