Ready to Ship, 1000 mL
-
PES Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2…
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
KIMAX Squibb Separatory Funnels With Glass Stopper And Stopcock
DWK Life Sciences (Kimble)With Standard Taper glass stopcock and Standard Taper glass stopper 60 mm long stem, which drains completely after stopcock is closed
-
Griffin Beakers - PP
labForce® (powered by Thomas Scientific)Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…
-
Scienceware® Buchner Funnels, Single Piece
SP Bel-ArtFlast flowing with Fritware® Porous Plates HDPE with sealed-in, polyethylene filter plate of coarse porosity (90-130 microns) Offer good retention and fast flow under vacuum Can be used with or without filter paper Use below 52°C (125°F)
-
PPCO Centrifuge Bottles
Thermo Scientific NalgenePerform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…
-
Transluscent polypropylene beakers printed with blue graduations.
-
Tri-Pour PP Beaker
United Scientific SuppliesThese disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.
-
United Scientific™ BEAKERS, WIDE SPOUT, PP
United Scientific SuppliesBeakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Chemware® PTFE Griffin Beakers
Saint GobainChemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
PYREX Erlenmeyer Shaker Flask
CorningDelong style Extra deep baffles These PYREX Delong style shaker culture flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is…
-
Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Polycarbonate Erlenmeyer Flasks
CorningDisposable flasks feature wide, easily accessible mouths All flasks have Sterility Assurance Level (SAL) of 10 -6 Non-binding Wide, easy access mouth Made from optically clear polycarbonate Sizes from 125 mL to 1 L Certified non-pyrogenic Non-baffled bottoms Certified…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
ValueWare® Beakers, Low Form, Heavy Duty
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings. Glass beads indicate full capacity line. Permanent white enamel…
-
Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…
-
Class A PYREX graduated cylinders are calibrated “To Deliver” (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement bumper…
-
Nylon Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…