Accurately measures temperature in freezers, refrigerators, incubators, water baths and heating blocks Enclosed “temperature buffered” sensor Range: -50 to 70°C (-58 to 158°F) Resolution: 1°C; accuracy: ±1°C Glycol bottle insulates sensor from…

Graduations on clear tubes are printed in bold easy-to-read black ink and are accurate to ± 2% 50mL clear tubes include a black printed 50mL graduation line and 1, 2 and 3mL graduations molded into the conical bottom Large white marking area provides excellent contrast for…

Available in 6, 12, 24, 48 and 96 well flat bottom configurations NEW — 96 well plates now available with a round bottom Plates are labeled with alpha-numeric markings for easy identification of individual wells Each well has a raised rim which nests into the rings on the single…

CE-Force Sticky Floor Mats   Multi-layered clean-film full adhesive layers form mats that effectively capture dirt and dust from foot-traffic and equipment wheels before they enter the controlled environment. Each of the numbered layers of the mat peels off easily to reveal a new clean…

Standardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…

XtraClean™ cleanroom beard covers are made from hydro-entangled polypropylene fabric and have a latex-free elastic band. Packaged in a sealed polyethylene bags as well as a separate inner-case, poly-bag liner. Size is Universal and the color is white. Sewn with latex-free…

XC6010 Frocks are ideal for use in low particulate clean and contolled environments. Constructed from a lightweight blend of polyethylene and polypropylene into a unique breathable membrane. Fabric is suitable for exposure to blood borne pathogens, some hazardous liquids, and any wet general…

Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting…

Decon's Pure Ethanol 200 Proof is 100% pure (undenatured) ethanol. Meets USP specs. Used as a cleaner, solvent, or as a reagent. Please Note:  Our ethanol products are available to customers who hold a valid, TTB issued " Industrial Alcohol User Permit ."  Certain…

Cannon Fenske Routine, CFRU (Uncalibrated) & CFRC (Calibrated) Viscometers For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 and ISO 3104 requirements Specifications conform to ASTM D 446 and…

Designed as preparation and storage racks for any variety of 0.2mL Tubes and Strip Caps before and after sample processing application Formatted in the standard 8 x 12 microtiter format Identified "A" through "H" vertically, and 1 through 12 horizontally, providing…

XtraClean® Latex free / low lint lab coats are ideal for use in ISO 7 controlled environments and many general application areas. Breathable cloth-like fabric is comfortable and cool. Features include plastic snaps, knit wrists, knit collar, and three pockets. Constructed from…

The Most Complete Balance in its Class! Striking the ideal balance between inventive features and functional, uncomplicated weighing capabilities, the OHAUS Adventurer incorporates all of the applications necessary for routine weighing and measurement activities. With a color touchscreen,…

BD Microtainer® Blood Collection Tube was designed for ease-of-use and helps to ensure that a quality capillary blood sample is collected. The wider-diameter BD Microtainer® Tube with BD Microgard™ Closure features an integrated collector and improved mixing ability. This full array…

Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Can withstand temperatures from -55° to 120°C …

Patented hinged lid offers convenience and archival integrity, ensuring markings and vials remain in sync. Lid stays attached to base minimizing risk of separation and lid contamination. Lid is easy to open when frozen. Available in 9x9, 10x10, and vapor phase LN2 compatible formats. Plastic…

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research…

High quality coverslips glasses are essential for microscopy and imaging. Cover glasses with diameters of 5 mm and 8 mm are now available from stock in convenient packages of 100. Available in #1.0 (0.15 mm), #15 (0.17 mm) and #20 (0.22 mm) thickness Available in round, square and rectangular…

Multi-Well / Deep-Well Plates. Ideal for sample collection, preparation, and long-term storage. HTS-friendly—compatible with most liquid-handling robots. Centrifugation to 4,000 x G. Manufactured from virgin polypropylene to ensure purity and sample integrity, chemical…

Everyday Use. Solid Performance. Our PerformR® centrifuge tubes combine reliable performance in major centrifuges. Spin rates higher than most popular brands. And high quality lab certified non cyto-toxic medical grade resin. PerformR® tubes can be used in everyday lab work and…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed…

Minimal bending of skirts Compatible with automated systems 150 µL max. wall volume (when used with cap strips) Skirt can be labeled or bar-coded Fits most thermal cyclers and the MegaBACE capillary sequencer Stackable Low-profile design enhances efficiency. Plates are…

These XtraClean non-skid shoe covers are ideal for a variety of floor surfaces, including tile, coated concrete and epoxy floors. The seamless bottom design is ideal for wet environments and maximum non-skid performance. Features:   Welded…

FRIO-Temp® verification thermometers for sample temperature measurement within Freezers, Refrigerators, Incubators or Ovens without introducing contamination. These thermometers are filled with environmentally safe non-toxic, non-hazardous, biodegradable Enviro-Safe ® liquid…

CELLTREAT Tissue Culture Dishes are manufactured under the most stringent conditions in order to assure the integrity of your tissue and cell culture work. Class 100,000 clean room, USP class VI virgin polystyrene, and ISO 9001:2000 quality management systems all contribute to the consistent tissue…

BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed…

NEW – Now available in 100mL size for large volume pipetting Peel-to-open plastic/plastic wrappers are the ideal option for eliminating particulate; proven benefit over traditional paper/plastic wrapper Wrappers reduce static cling versus other brands of plastic wrap pipets All…

Hach calibration pH buffers are available in a variety of color-coded or colourless solutions, in different packaging types and sizes from 15 mL up to 20 L. pH buffers are also available in convenient single-use pouches (Singlet) and unit-dose powder pillows for on-site and field analyses ensuring…

CELLTREAT Vacuum Filter Systems are ideal for large volume sample separation and purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes…