Highest 2% RH Accuracy Less than 30 second RH response time Dual backlit display Simultaneous display of: Humidity/Temperature, Humidity/Dew Point, Humidity/Wet Bulb Slim design with rubberized sides for better grip and for one hand operation • Data Hold and Min/Max functions Auto power…

View giant size digits on your bench timer from across the lab. Visible from shelves, in hoods, or perched on instruments. Eliminates “squinting” to observe alarm time remaining. Giant-Digits with 1-1/3 inch digit height Viewable from 50 feet Countdown and alarms on single…

Numbered keys for easy countdown timer setting Vivid LCD digits readable from 8 feet NIST Traceable® Certificate supplied Accurate to 0.01% The alarm timer stopwatch counts down with an alarm and counts up with a time-out feature. It can be programmed to count down from 99 minutes, 99 seconds…

Traceable® Digital Stopwatch ( 8788T52) Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed lab tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest instrumentation.…

Lightweight and compact Wide measurement ranges Easy to operate Enviro Meter is four tools in one small and easy transportable hand-held unit. Anemometer, humidity meter, light meter and two thermometers all feature exceptional accuracy and reliability. Unit features a bright LCD…

Built-in laser allows non-contact measurements up to 6.5 feet from target User settable pulse per rotation value Narrow beam Laser photo tachometer for accurate non-contact RPM measurements Measurements from up to 6.5ft from the target for improved safety and accessibility Display characters…

Features three decibel ranges for greater precision Low decibel range: 35.0 to 80.0 dB; medium decibel range: 50.0 to 100.0 db; and high decibel range: 80.0 to 130.0 dB Resolution is 0.1 dB and accuracy is ±2 dB Unit provides weightings for both A and C frequencies to meet IEC 651 Type 2…

Air velocity ranges /resolution (see chart below for details) Accuracy is ±(1% full scale plus 1 digit) Temperature accuracy is ±0.8°C or 1.5°F Probe expands from 9 1/2 inches to 3 feet in length Features include minimum/maximum memory, data hold and Serial…

Ideal for multiple and simultaneous processes Two 1/100th second displays Counts up or down to 10 hours Available with NIST Traceable® certificate of compliance In stopwatch mode the current lap time is shown in the upper display, cumulative total in lower one. Memory stores last 8 lap times…

Set program in less than 5 seconds Two models Model 1 has an “on” interval setting of 0.01 to 99.99 seconds, 1 minute to 9999 minutes or 1 hour to 9999 hours. Model 2 has separate “on” and “off” interval settings of 1 second to 99 seconds, 1…

Triple display Adjustable volume Adjustable alarm duration Memory recall NIST traceable certificate User-friendly timer displays three different times simultaneously, counts down and alarms. Three different tests may be run at the same time using three line display. Channels can be started…

3-in-1 combination meter Combines the functions of a Humidity Meter, Type K Thermometer, and InfraRed Thermometer for non-contact surface Temperature measurement Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio Type K…

Large display Hold function Air current accuracy: ±3% Air current range: 0.4 to 30 meters/second; 80 to 5900 feet/minute; 1.4 to 108 km/hour; 0.8 to 58 knots, 0.9 to 68 miles/hours Temperature range: 10 to 50°C/14 to 122°F RS232 out Unit is ideal…

NIST Traceable® Certificate supplied 3/8” LCD digits for easy viewing Accurate to 0.01% Times two tests at once Two-Memory Timer delivers on-the-dot timing operations, whether counting up or down from 23 hours, 59 minutes, 59 seconds. Timer can be used as a time-of-day…

Counts up and down Resolution: 1 second; accuracy: 0.01% Extra-large, 1/2" high LCD Timer counts to 23 hours, 59 minutes, 59 seconds. “Thru zero” feature allows counting down, alarming and counting up. A time-out mode stops the timer for “off” periods in both up and down timing. During…

Easy contact operation Accuracy is 4% + 2 digits Tachometer reading range is from 10.000 to 99,000 (resolution 0.001, 0.01, 0.1, 1). In addition, it reports results in feet per minute (3.0000 to 30,000), yards per minute (1.000 to 10,000) and meters per minute ( 1.000 to 9999.9).…

Ideal for measuring inside diameter, outside diameter and depth Stainless steel or carbon fiber models Zero at any point Switch between inches and millimeters NIST traceable Thomas Traceable digital calipers take length/diameter measurements three ways: outside, inside and…

Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…

Waterproof (IP67) rugged design for heavy duty use CAT IV-600V safety rating for industrial applications 0.5% basic accuracy Over-sized high contrast 4000 count LCD backlit display 1000V input protection on all ranges Dual sensitivity frequency functions Relative Mode Data Hold and Auto…

For rapid and accurate counting of multiple factors Wide steel base plate for desk or benchtop mounting Color-coded buttons All counters register to 999 Counters without totalizers offer inexpensive multiple counting

Large 3/4” display 24-hour capability Adjustable volume alarm Bright red, flashing light; can be used w/o sound to signal end of cycle Unique start/stop button for easy access Unit counts down in second increments. Loud alarm and flashing light command…

Dual Laser Targeting Choose from 12" or 30" distance model where two laser points converge to 1" target spot White backlit dual LCD display Fast 0.15 second response time with Max display Adjustable emissivity increases measurement accuracy for different surface Adjustable…

Lightweight and disposable Sound confirmation every time a button is pressed NIST Traceable® Certificate supplied Accurate to 0.1% Ideal for easy-duty, occasional-use needs where high precision is not a requirement. Can be worn around the neck with the (included) 38” lanyard. Times to 24 hours…

Easy to read LCD Counts to 99,999 Fail-safe reset Weighs only one ounce Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts. Use it to count cell growth on petri dishes, inventory parts, and tally samples received. Touch, sound,…

Fast, stable and accurate response Light Meter Lux 840006 Monitor light levels anywhere with fast, stable and accurate response. Results are easily read on t he extra large digits ( 7/8" high, 2 2mm) t hat also indicates w hen t he battery is low or the reading over range. The color and…

Display 7/8" x 3/8" to 00.00 Press “min” and “set” together to reset Press “start/stop” to start and again to stop Press any key to stop alarm “Recall” feature returns automatically to preset time Displays up to 99 minutes…

Ideal for bench use LCD designed for viewing at any angle NIST Traceable® certificate supplied Easy to operate Extra-large keys Accurate to 0.01% Timer counts down from 24 hours to 1 second in second increments. Special memory allows programming an instant replay repeat time, which appears…

For blood cell, corpuscle, and blood platelet counts, bacteria colony work, etc. Registers to 9999 and two reset knobs permit quick resetting to zero

Quartz-crystal accuracy Large, 2 1/8" LCD digits NIST traceable Unit displays time in 12-hour AM/PM or 24-hour military time. Temperature can be displayed in °C or °F. Perpetual calendar shows month, date, day of week and automatically adjusts for leap year. Clock includes an individually…

Specifications Barometric pressure from 8.85 to 32.45 inHg with a resolution of 0.01 inHg 300 to 1100 mbar with a resolution of 1 mbar Accuracy is ±0.2363 inHg (±8 mbar) at tested points Altitude range –2296 to 29520 ft (–700 to 9000 meters ) with a…

Compact size Convenient portable size with wide temperature range measuring up to 1200°F (650°C) Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints Adjustable emissivity for better accuracy on different surfaces Built-in laser pointer…

Automatically switch equipment on or off up to 14 times a day Get accurate, reliable measurements with included NIST-traceable calibration Provides daily and weekly on/off control. Plug into any three-prong outlet. Minimum switching interval is one minute; maximum is 168 minutes.…