Portable Water Quality Test Kits

MColortest™ Ozone Test Method: colorimetric, DPD, with color-disk comparator

7831 Octet Comparator Sufficient for 50 tests Tungstophosphoric and molybdophosphoric acids are reduced by tannins and lignins to form a blue color. Octet Comparator has color standards representing 1, 2, 3, 4, 5, 6, 8 and 10 ppm Tannin or lignin-like substances.

Direct Reading Titrator For determining free carbon dioxide in water Range of 0 to 55 ppm CO2 in 1 ppm increments Employs APHA Method 406B with sodium hydroxide titrant. Sufficient for 50 tests at 50 ppm.

Tube test for the determination of COD in saltwater. This test kit is suitable for chloride-containing wastewater, surface water and seawater with chloride concentrations of 2–18 g/L Cl-. Precise rapid tests for all kind of water and waste water samples according to ISO 15705. Time-saving and...

Test for 7 Essential Factors Chloride Sulfate Alkalinity Total Hardness Calcium Hardness Magnesium Hardness Sodium

UN Number: UN3316

All necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system

Method: colorimetric with test strips and reagent 10 - 25 - 50 - 100 - 200 mg/l Sn MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +15°C to +25°C. Hazard: Toxic The tin test can be used to test for tin and tin compounds in...

The Legionella System Test Kit allows you to easily collect a filtered water sample directly from the water system. The filtered sample increases the sensitivity of the test. This test kit contains a sample point fitting to connect to the water system (such as a shower head or on-line sample point)...

MColortest™ Total Hardness Test Method: titrimetric with titration pipette

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...