Test Vials

Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders...

Manufactured from amber 203 borosilicate glass Open top white polypropylene closures attached Closures supplied with PTFE-faced, silicone septa Vials packaged in corrugated trays with partitions Septa is PTFE-faced (0.005”) silicone (0.120”)

Made of Type 1 clear borosilicate glass, Our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged...

Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

The QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating...

The Agilent Technologies vial insert with a volume capacity of 250 uL consists if easy-to-read graduations and the strong polypropylene construction offers added strength. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent vial kit for Waters & Dionex. Includes screw top vial, 4 mL, 13 mm, clear, black cap, PTFE/silicone septa, similar to Waters 186000838C, Dionex 03-375-3G, National Scientific C4015-1, 100/pk. Vial size: 15 x 45 mm. Application: For Waters & Dionex, Similar to Waters 186000838C, Dionex...

ABC CONV PK, W225152, W225334A-04

Leakproof, 1¼ turn cap Wide mouth - 24mm opening Lower background than glass These standard size vials fit all major counters. The linerless polythylene cap goes on the polypropylene vial easily, yet seals completely. Less than 50% the background of glass. Suitable for low activity counting....

Inserts for TruCool cryogenic vials auto caps 1,000 per pack For TruCool® Cryongenic Vials, see the May We Suggest information below the Insert listings. Azenta products are intended for sale/shipment within the US , Canada, and Latin America only. All other International customers should...

material: amber glass vial feature: closure type screw thread / deactivation Silanized packaging: pkg of 100 ea O.D. × H × I.D.: 15 mm × 45 mm × 8 mm Beilstein Registry Number: 2054397 size: 4 mL fitting: thread 13-425 Features and Benefits Proprietary silane treatment shields active silanol groups...

Bulk packaged in a case of 1,000 caps Available in three cap materials and with four liner types

Manufactured from Type 1 Class A Borosilicate Glass. Developed for use with Hewlett Packard and other auto-samplers. Vials accept 11mm Snap-Ring Closures. Patented Snap-Seal design for positive seal. Specifications: Type 1 Class A Borosilicate Glass Size: 12x32mm Snap-Ring Size: 11mm Case Quantity:...

Available in clear or amber borosilicate glass. Choice of .125" or .100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

ACCUFORM® micro-vials have a V-shaped interior to enable recovery of a minute residual sample by means of a syringe needle. Designed for an aluminum seal Graduated Closures not included Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,...

Application: Screw cap may be used for capping water samples in amber glass vial comprising of a polytetrafluoroethylene silicon septum for the analysis of chlorinated volatile organic compounds in water samples using headspace-solid-phase microextraction with gas chromatography (HS-SPME-GC).

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,...

Unrivaled cap seal exceeds DOT and IATA regulations ensuring ultimate protection of samples during transportation and demanding freeze-thaw handling Optional 2D Data Matrix Bar Code Insert provides unique identifier for traceability Bottom format allows unrestricted view of 2D bar code for...

Designed to work in the Waters WISP™ 96 position autosampler. Available in clear or amber Type I borosilicate glass, or polypropylene for easy disposal. Vials feature thicker walls for safer sample handling. Limited volume shell vials have a precisely designed conical bottom which permits...

1.8 mL capacity 12 x 32 mm Screw thread With or without patch Color coded PP caps The ABC Vial™ Convenience Packs include 1.8 mL vials packaged in a recyclable PETE plastic clamshell to help prevent particulate contamination; caps are also included. Vials and ABC Screw Thread Caps are...

The Agilent Technologies 2 mL clear crimp top vial and cap with write-on features a wide opening that helps in targeting larger samples. This vial is packaged safely to avoid breakage and contamination, sold as 50,000 per pack. This product is only available to U.S. Domestic Customers. For research...

Superior quality 2D barcoded tubes to assist sample identification Designed for short or long term storage down to cryo temperatures Innovative manufacturing Our tubes are manufactured by a highly specialised and automated process, known as dual injection. This process creates a powerful molecular...