Test Vials

14.75 x 32 mm clear borosilicate crimp neck serum vial with 13 mm neck finish. crimp-top glass serum vials are suitable for pharmaceutical packaging, lyophilization, and sample storage. These borosilicate glass serum vials are break resistant and typically used for handling and containment of...

Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of Type...

•Thinner liner for easier penetration •Special PTFE/silicone liner with only 0.05mm PTFE film (easier penetration that thicker PTFE) •These products should be used with the SPME vial that has a thicker lip Other Notes: Recommended for: CTC Combi-PAL.

Headspace vials and caps are used in headspace gas chromatography analysis because of their ability to withstand the pressure from gas. Agilent headspace vials come in two basic sizes (10 mL headspace vials and 20 mL headspace vials). Both flat bottom and round bottom styles are available for use in...

Prevent unknown peaks impacting your results Save time and increase productivity with the first family of vials and closures to certify true LC/MS & GC/MS lot-specific testing results in a single package. All MS Analyzed Vial Kits are: Shipped with lot-specific Certificate of Analysis including MS...

Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you...

Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 23 x 75 mm Capacity: 20 mL

With a 40% larger opening, the Large Opening Vial is specifically designed to eliminate broken needles due to the increased target area. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with a graduated marking spot...

Agilent offers a wide selection of CrossLab HPLC syringes to ensure accurate and effective sampling for HPLC analysis. Our HPLC autosampler syringes are compatible with competing legacy OEM autosamplers including the CTC PAL, Waters 717 & WISP ALS, Dionex WPS-3000 & ACC-3000, & Shimadzu...

Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. Our closures are...

FAST and EFFICIENT sample clean up Various filter material and pore sizes available. Vial Size: 12mm x 32mm Sample Volume Size:<450 μl closure type: 11mm yellow snap cap septa: red ptfe hite silicone with slit    <>

Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:1. Wash containers in hot water using laboratory grade non-phosphate detergent.2. Rinse three times with copious amounts of tap water to remove detergent.3. Rinse three times with ASTM Type I...

Made of polystyrene With optically clear parallel sides. The snap cap is leakproof but easily removed. Guaranteed to meet or exceed O.E.M. specifications. Each lot is tested to ensure cleanliness. Available in specially designed vacuum formed trays or in bulk packaging. Dimensions: 35 mm x 56 mm H...

This vial is designed to work in Shimadzu and Waters WISP™ 48 position auto samplers. Choose from clear or amber borosilicate. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking spots.

The PerkinElmer replacement spring makes use of two springs for installation and is used in gas chromatography technology.

CELLTREAT Freeze Cryogenic Vials are designed for storing biological material at temperatures as low as -196°C, in the gas phase of liquid nitrogen Internal thread design prevents contamination and uses O-ring silicone seal to ensure positive seal at any temperature External thread cap features...

Amber Screw Thread Vials offer protection from harmful light and UV rays for light sensitive products. These general purpose glass vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Thermoset (phenolic) hole caps provide the widest...

IntroFluidX Next-Gen jacket 2D-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities Next Generation manufacturing techniques Codes readable without removing tubes from racks Suitable for...

The chemically inert, patented process produces a true bond at the molecular level of the septa and plastic cap, eliminating excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with...

The Agilent 2 mL A-line clear crimp top vial has unique thread design that ensures a watertight and airtight seal. A thicker walls help to eliminate cracking during clamping. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Made of amber glass, our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive, white...

The Agilent Technologies replacement Lithium-Ion battery is designed to use with crimpers, decappers and accessories. Application: Crimpers, Decappers and Accessories This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Borosilicate glass vial with 300uL glass limited volume insert Insert is fused to vial to prevent needle damage Writing patch on all vials Purchase vials and caps separately or together in convenience packs Use with WHEATON ABC Screw Caps