Select up to 3 products
Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials....
Headspace vials are of different sizes. The style and diameter of headspace vials depends on the autosampler. The beveled finish vial reduces the amount of sealing surface between the crimp seal and the glass surface.
Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for lyophilization and...
Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be...
Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass insert with bottom spring, 6 x 29mm •24722 Polypropylene insert with bottom...
Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to offer...
Clear and amber screw thread EPA vials for the collection and storage of water samples comply with the guidelines for establishing test procedures for the analysis of pollutants (Ref. EPA Methods 601, 602, 603 and 604). Clear EPA vials are fabricated from KG-33 borosilicate glass. Amber EPA vials,...
Cryogenic Vials externally or internally threaded option threaded caps with silicone O-ring 1mL, 2mL, 3mL, 5mL sterile printed graduations and marking area self-standing star foot 50-place rocking lack included with each case 10 resealable bags of 50 tubes, 500/cs Cap inserts for cryogenic vials...
The Environmental Sampling Supply sample vial with septa, is suitable for use in research facilities and chemical laboratories. It is made of sturdy borosilicate glass material which ensures long lasting usage.
The Agilent 16 mL test tube made from borosilicate glass is ideal for fraction collection. Application: for HPLC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
Thickness of the glass surrounding bottom of cone magnifies liquid contents to facilitate sample withdrawal Self-standing with flat-bottom exterior Ungraduated, with open-top closure and PTFE-faced silicone septum Vials are made of KG-33 borosilicate glass, which meets USP Type I or ASTM E 438, Type...
Snap top vial kit, 2 mL, clear vials, orange caps, PTFE/silicone septa, 100/pk. Vial size: 12 x 32 mm (11 mm cap). This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
Our pre-barcoded 4mL clear compound storage vial kits allow efficient, accurate compound storage and tracking without the hassle of printing labels or risk of labels falling off. Each kit includes 100 pre-barcoded glass vials and their accompanying closures conveniently packaged for easy use....
PTFE-faced butyl septum was used in sealing headspace vials to analyse the sampling efficiency and breakthrough of methyl bromide on activated charcoal using GC. It was also used for sealing water samples during headspace analysis with GC-FID, in a study which demonstrates cross-validation of...
Headspace vials and caps are used in headspace gas chromatography analysis because of their ability to withstand the pressure from gas. Agilent headspace vials come in two basic sizes (10 mL headspace vials and 20 mL headspace vials). Both flat bottom and round bottom styles are available for use in...
The Agilent Technologies 2 mL amber crimp top vial and cap with write-on features a wide opening that helps in targeting larger samples. This vial is packaged safely to avoid breakage and contamination, sold as 10,000 per pack. This product is only available to U.S. Domestic Customers. For research...
Headspace vial, beveled top, rounded bottom is a clear glass vial, which can be used with CTC autosampler (Combi PAL).
Assembled kits are shipped with the septa installed in the cap and the cap screwed on the vial.
Conical Reaction Vial, Heavy Wall, Graduated, Synthware, Multiple Sizes available, Joint: 5/5, 7/10, or 14/10 available.
Manufactured from Type 1 Class A Borosilicate Glass. Amber vials are manufactures from Type 1 Amber Glass. these vials fit most auto-sampler. Designed for use with varian and other auto-samplers. Specifications: Type 1 Class A Borosilicate Glass Size: 12x32mm Amber & Clear Vials Available Case...
Certified to contain<50 ppb total organic carbon standard 40 ml septa vial is clear borosilicate glass with 0.125 in. thick, i-chem blue, ptfe ilicone septa in an open-top 24-414 polypropylene cap. the i-chem molded-in septa retainer ring holds the septa securely in place without bonding to the...<>
Clear or amber Teflon®-faced Screw thread cap Teflon®-faced silicone lined open top vials are suitable for use in water sampling according to EPA 40 CFR 136, “Guidelines for Establishing test Procedures for the Analysis of Pollutants.” The open-top screw cap has a specially designed...
Cryo vials are designed for storage of samples as low as -196°C*. DNase, RNase,and Pyrogen-free. Radiation sterilized. Polypropylene vials include a cap embedded with a non-toxic silicone O-ring for a secure seal, a large white frosted labeling area, and silk screen graduations. Star base and...
Application: Assembled screw cap may be used to store fresh plant material for collecting volatiles using solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method performed for determining bisphenol A, 4-t-octylphenol and...