Centrifuge Tubes

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full. Thermo Scientific™ Nalgene™ Sealing Cap Assemblies include a Viton™ fluoroelastomer o-ring. Also recommended when spinning hazardous materials compatible with centrifuge tube...

High temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation Graduated tubes have markings every 100µL for easy...

This graduated 50 ml KIMAX tube has a short tapered bottom. Graduated and calibrated to contain. The top end has a pour spout. Scale, legend and marking spot are durable white ceramic enamel. 50ml total capacity; graduated from 0-10 ml in increments of 0.5 ml and from 10-50 ml in increments of 1 ml

Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale...

KIMAX tube with a long taper. Calibrated "to contain". Used to determine the bottom sediment and water in petroleum. Made in accordance with the former specifications of the American Petroleum Institute. Scale, legend and marking spot are durable white ceramic enamel.

Made of polypropylene Having all the advantages of our popular T341T Series, the specially formulated polypropylene used to manufacture these tubes provides a low adhesion surface to obtain maximum sample yield. Ideal for research procedures such as nucleic acid amplifications, protein work and...

MTC Bio's 25mL tube is the newest addition to our family of screw cap conical tubes. Closing the obvious gap between 15mL and 50mL tubes, they are ideal for any application that requires more than 15mL and less than 50mL, including midipreps, general sample prep, centrifugation, mixing and...

Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from coming in contact with the threads,...

Globe’s clinical centrifuge tubes are molded from polypropylene (PP) and feature flat-top, leak resistant blue caps. The tubes are printed with black graduation marks and have a large white writing area. Sterile tubes have attached blue screwcap Black printed graduations White printed writing space...

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport.  Polypropylene...

Corning® 50mL clear polypropylene (PP) preassembled closed systems self-standing centrifuge tubes come with the advanced polyethylene CentriStar™ caps. The CentriStar™ cap has an easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design...

Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to 20,000...

Samples of proteins, other biological molecules, and cell cultures are commonly shipped and stored on dry ice, putting them at risk of acidification by up to 2.5 pH units. In standard centrifuge tubes, CO2 vapor from dry ice enters the tube headspace and causes a significant drop in the pH of the...

5mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15mL tubes. Designed to fit the same rotors as our 15mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes. The interior surfaces are ultra-smooth with low retention...

Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,...

Carry out a variety of applications with these tubes, which combine the superior separation and pelleting of a conical tube with the higher sealing capability of an Oak Ridge tube. Thermo Scientific™ Nalgene™ Conical Oak Ridge Graduated Polypropylene Centrifuge Tubes can spin up to...

These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.

Withstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. With sealing cap closure option. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity for proper performance. Polypropylene screw closure...

The easy–open, easy–close design of the Flex Tubes® provides convenient, ergonomic, and reliable one-handed operation. Whether sample preparation, centrifugation or storage – the Flex Tubes® fit perfectly into your workflows! The easy-to-open, securely closing, Flex...

Round bucket centrifuge tube adapter for 50mL Falcon® centrifuge tubes. Adapter is for use with the Eppendorf® swing-bucket rotor (A-4-38) for centrifuges 5702/5702 R/5702 RH Tube has a conical bottom that  fits 1 tube per adapter; 4 tubes per rotor Adapter diameter is 30mm; length is...

These Oakridge Style Centrifuge Tubes from Globe Scientific are the economic choice for high speed refrigerated or non-refrigerated centrifugation. Molded from durable, chemical resistant polypropylene, the tubes have round bottoms and consistent wall thicknesses for centrifugation at up to 50,000g...

Graduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous splashover; prevents...