Test Tube Racks

1781Q25 TrippNT's Single ABS Bottle Holder 500mL keeps your bottles upright and secures. It stabilizes top heavy bottles and stores one 500mL bottle. This product line has keyholes for mounting with provided hardware.  1781Q27 TrippNT's Double ABS Bottle Holder 500mL keeps your bottles...

Made of polypropylene Versatile and easy to use Two sided Holds up to 25 tubes of 10 to 12 mm Accomodates 16 PCR or 0.2 to 0.5 ml tubes Supplied with handles This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes....

Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.  • Fingers allow simultaneous decanting to save valuable time  •...

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable....

PREMIUM QUALITY || Test tube rack featuring a sturdy epoxy-coated steel construction that will stand up to the wear and tear of the lab ACCOMMODATES 36 TEST TUBES || Supports up to 36 test tubes that measure up to 13mm in diameter - Provides convenient insertion and removal of tubes. Rack Measures...

Two levels and wide spacing provide easy sample access and visibility. Molded from durable, autoclavable polypropylene, the rack has non-skid rubber feet. Tube positions are numbered, 1 to 20, for organizing samples.

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak...

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable....

Meet your tracking and packaging requirements for solid or liquid sample storage with Thermo Scientific™ Nunc™ Low-Profile 5.0mL Externally-Threaded Universal Tubes. A robust solution for solid or liquid sample storage, tubes feature 2D barcodes, graduations, a white patch for labeling,...

Epoxy-coated steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand up...

Autoclavable Durable polycarbonate Holds CryoTube vials and grips Nunc CryoTube vials with interlocking feet. Starfoot Cryotubes fit into grooves for one-handed operation.

Durable, ABS plastic rack can stand on flat surfaces as well as be attached to the metal sides of lab cabinets and appliances. Strong magnets are included on both sides of the rack for increased versatility. Strong corner magnets for attachment to metal fume hoods, refrigerators and cabinets Angled...

PulpFixin Cryogenic Box, FeatureFilm™, Compostable Replace Plastic - A direct replacement to polypropylene and polycarbonate plastic boxes Moisture Resistant - Sealed with FeatureFilm Compatible with Cold Storage - Tested for long term storage in LN2 at -196°C Fits Standard Freezer Racks -...

Made of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable Combi-Box™ saves...

PREMIUM QUALITY || Test tube rack featuring a sturdy aluminum construction that will stand up to the wear and tear of the lab ACCOMMODATES 18 TEST TUBES || Supports up to 18 test tubes, 6 measure up to 25mm in diameter, 6 measure up to 19mm in diameter, 6 measure up to 13mm in diameter - Provides...

Made of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today,...

Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples to be incubated at the same temperature...

Steam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.

Economical yet very durable racks that are submersible, autoclavable, and easily stack when empty.  Made from a special blend of polypropylene (PP) that makes them sink in a water bath and maintain their stability, even in agitated water.  The top tier features an alphanumeric grid...

This durable and autoclavable Cryo rack can hold 50 vials. Unique design at the bottom of each well lets vials be unscrewed without removing them from the rack. The rack features an alpha numeric index, and anti-skid rubber feet.

Material: Polypropylene Product Compatibility: S20 Technology Type: AA, Fluorescence (FLR), ICP-MS, UV/VIS, ICP-OES

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 2x6 Holds 12 Tubes Dimensions: 10" X 3 1/2" X 2 7/8" Minimum...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 19/32? (15MM) Tube Size: 13mm Spacing: 6x12 Holds 72 Tubes Dimensions: 8 1/6" X 4 1/8" X 2" Minimum Requirement:...

Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with...