Test Tube Racks

Ice Rack™ - detachable lid, tube platform, and base, numbered cavities, 6/cs 72 × 0.5mL tubes accepts snap cap and screw cap 0.5mL to 0.65mL tubes 72 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to 2.0mL tubes 100 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 4x6 Holds 24 Tubes Dimensions: 10" X 6 3/4" X 5" Minimum Requirement:...

Increased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part 1910.1030...

Thermometer Rack. Suitable for holding up to 25 thermometers in the correct vertical position, thus avoiding mercury separation, which may occur when thermometers are stored improperly. Manufactured from 1/4" high density polyethylene, the rack is sturdy and will not tip. Sides have large...

Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;...

PREMIUM QUALITY || Test tube rack featuring a sturdy polypropylene construction that will stand up to the wear and tear of the lab. Comes in blue or white color ACCOMMODATES 6 TEST TUBES || Supports up to 6 test tubes, with 2 holes that measure up to 25mm in diameter and 4 holes that measure up to...

The ZR-96 MagStand is a magnetic stand for the separation of magnetic beads in standard 96-well format plates, especially for high-throughput applications including the following product lines: EZ-96 DNA Methylation MagPrep product line, ZR-96 Genomic DNA MagPrep, Zyppy-96 Plasmid MagBead Miniprep,...

PREMIUM QUALITY || Test tube draining rack featuring a sturdy vinyl-coated steel construction that will stand up to the wear and tear of the lab ACCOMMODATES 48 TEST TUBES || Supports up to 36 test tubes with 2.75" pegs - Provides convenient insertion and removal of tubes WALL MOUNTABLE || Stands...

Linear low-density polyethylene Safety yellow color Molded to hold bottles at both top and bottom, preventing any contact between them. Base has three sockets on either side and integral handle in the center. Top fits down over the handle and snap-locks at both ends of base. Sockets in top hold...

Specifically designed for incubating 1.5mL microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the foam-filled...

For Matrix: 500ul (0.5ml) Latch Rack (H=1 1/16"/27.48mm)   For Micronic:  Lborack 96 format with Lw Cover (H=15/16"/23.8mm)   For Fluidx:  Low Profile 96 Format for 0,5ml and 0,75ml with Low Profile Lid (H=1"/26.0mm)   For Abgene:  0.3ml 2D...

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable....

Steam autoclavable at 121°C (250°F) Dimensions: 128mm x 105mm x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9...

Labcon 16 or 36 Place Freezer Storage Boxes for 50mL and 15mL Centrifuge Tubes. These boxes are designed to hold 50mL or 15mL tubes and are perfect for long term storage of frozen samples. They include a white upper body that can be easily labeled with a lab marker, a numerical reference grid, and a...

Bottom is of white polycarbonate with a permanent foam insert; lid is of clear polycarbonate Insert can accommodate up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube identification....

Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low (-80 deg) freezers on the market; racks are designed for ultra low upright freezers. Application: For 3.75 in High Standard Boxes These drawer racks facilitate...

For large volume centrifuge bottles Epoxy-coated steel wire rack is ideal for conical-bottom centrifuge bottles that can not stand by themselves. Bottom rails hold bottles securely upright. Accommodates round-bottom tubes as well. Holds up to 60 mm diameter bottles (250 mL max.). Autoclavable....

For Matrix: 1.4ml Latch Rack (H=1 15/16"/49.84mm)   For Micronic:  Roborack 96 Standard Cover (H=1 15/16"/49.1mm)   ComoRack 96 (H=2"/52mm)  Comorack 24 (H=2"/52mm)   For Fluidx:  384 for Round Tube (H= 11/16"/17.1mm, each...

Designed to fit Duraporter® XL High-Capacity Sample Transport Thermoformed PETG Tube Rack Inserts can be used separately Lid removes completely for easy cleaning Insert deep enough to be filled with ice Available in three configurations: Holds 100 tubes with diameter up to 18mm, most 10 mL blood...

Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree of...

Universal Tube Rack will fit tubes from 10mm to 17mm OD. 25 position with patented inner clamps that keep tubes centered and vertical. This rack is dishwaher safe and can be used for temperatures up to 90°C.

The Precision Systems sample tube rack is designed for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use., with a durable construction, is an...