ICP-MS

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist...

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis, Omega...

The Agilent Technologies spray chamber drain tube assembly comes with a push-fit connection which helps to spray chamber drain and barbed connector to peristaltic pump drain tubing. It can be used for Quartz Scott double-pass. It is compatible with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS...

Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum...

A range of high quality accessories and supplies are available to enhance the performance of the Agilent ASX-500 Autosampler. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place...

MassHunter Workstation User Guide, English, G7201B Rev.B.01.03, for Agilent 8800 Triple Quadrupole ICP-MS. Application: For G7201B Rev.B.01.03, for Agilent 8800 Triple Quadrupole ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,...

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated...

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is...

The Agilent Technologies replacement collapsible ferrule is made of polychlorotrifluoroethylene which offers high tensile strength and good thermal characteristics. This ferrule adapts flangeless tube end fitting of 1/16 Inch and is suitable for integrated sample introduction system (ISIS3) used...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent ICP-MS skimmer cone bases are available in either stainless steel or brass. The operating temperature of the skimmer cone tip is controlled by the skimmer base material. The stainless steel base is used for nickel (Ni) skimmer cones. The platinum skimmer cone should only be used with the...

Drain tubing, PTFE, 1/16 inch od, 0.038 inch id, for PerkinElmer NexION Tubing is made from PTFE and is sold by the foot. Note that ICP-MS instruments require a six foot length of drain tubing. Agilent Technologies products are intended for sale/shipment within the US only. International customers...

The Agilent Technologies octopole assembly without #100 or #200 axial accelerator is compatible with Agilent 8900 ICP-MS and 8900 standard x-lens models for routine applications. Application: For Agilent 8900 ICP-MS. For 8900 Standard X-Lens Model For Routine Applications, G3665A without #100 or...

The Agilent Technologies UltiMetal Plus 10 meter tubing contains a stainless steel surface that makes it easier for the analysis of active analytes. Sturdy stainless steel construction prevents breaking and cracking of the device. This product is only available to U.S. Domestic Customers. For...

The Agilent Technologies comprehensive spares kit is suitable for use with Agilent 7900 ICP-MS. Application: For Agilent 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis, Omega...

The Agilent Technologies argon clean gas filter ensures high purity for all kinds of semi-conductor applications. This replacement filter is recommended for lowest background required in semiconductor applications (s-lens configuration) and is suitable for use with all Agilent ICP-MS instruments....

The Agilent Technologies discrete sampling valve nut is used for integrated sample introduction system (ISIS) with Agilent 7700 and 8800 ICP-MS. Application: For ISIS used with Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is...