Select up to 3 products
Ring for hanging Stem has groove for air passage
A high quality laboratory grade porcelain, made with uniform wall thickness and dense materials which provides stable mechanical strength and little permeability. When properly used, the glazed pieces can withstand temperatures of 1050 degrees centigrade and the unglazed pieces can withstand...
The Simport CytoSep™ Funnel Chambers for the Hettich Cyto-System optimize lab throughput with multiple funnel options in 2, 3, or 4 funnels per slide. These funnels are perfect for every application such as CSF, Viral infections, Bronchial secretions and come in four sizes from 1 ml to 8 ml....
The polypropylene Buchner funnels are two-piece, light-weight, and easy-to-clean. They are fully autoclavable. The top portion snaps to the bottom forming a vacuum tight seal. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.
With two chambers, cell deposit areas are close together and easy to find, helping to speed sample analysis. Two deposit areas on one slide enhance all of the advantages of the popular single chambers. Reduced time spent loading and unloading slides. Two cell deposit areas on the same slide means...
4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height: 85 mm
Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling
Addition Funnel, Pressure Equalizing, PTFE Stopcock, Synthware, Capacity: 10-1000mL available, Top Joint (Outer): 14/20, 24/40, and 19/22 available, Bottom Joint (Inner): 14/20, 24/40, and 19/22 available. Stopcock Bore: 2mm or 4mm available
Ai 24/40 standard taper joint glass funnel. Across International's Glass Feeding Funnels are engineered for precise fluid transfer in scientific and industrial applications. Crafted from high-quality glass, these funnels offer excellent chemical resistance and durability. Their design ensures a...
These funnels will snap quickly in place, allowing the pad to align correctly with the sample tunnel. Made with a compression ring around the sample hole in order to better control the rate of absorption and to ensure more consistent results. Two ports, one in the sample well and one in the tunnel,...
Ideal for preserving small-volume biological samples, this 1mL Tubular Freeze-Dry Ampoule ensures the integrity of the materials during the freeze-drying process. Its robust construction allows it to withstand high vacuum pressures, while the tubular design facilitates precise, efficient filling....
Addition Funnel, High Vacuum Valves, Synthware, Capacity: 100 or 250mL available, Joints: 14/20 or 24/40, High vacuum valve has PTFE O-ring at tip and PTFE wiper to protect Viton O-ring on shaft.
The Chemware® funnel is used for ultra-pure liquid transfer in biotechnology applications, environmental analysis, semiconductor and electronic labs. The top cone has a high side was to limit splashing, while the narrow step fits into a range of containers. The low surface energy of PFA...
For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.
Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.
This large, one piece, heavy-duty funnel is 6.35mm (1/4") thick. Perfect for industrial drums and other large funnel needs Made from low density polyethylene Exhibits exceptional chemical resistance to most acids, alkalis and some organic solvents.
These long stem funnels have smooth walls, 60 degree cone angle, and external ribs to prevent air lock. Molded in Polypropylene, these clear funnels can also be autoclaved.
Available in three sizes, these funnels have eight internal ribs to facilitate filtration. They are made of polypropylene. Funnel Assortment These funnels have eight internal ribs to facilitate filtration. They are made of polypropylene and includes one each of the 35mm, 52mm, and 65mm funnels.
Foxx Life Sciences EZwaste® 4" Safety Funnel features a latching lid with gasket to create an air-tight seal and to keep VOCs from evaporating into the air. The EZwaste® Safety Funnel is the ultimate lab safety product for liquid waste collection. Our safety funnels can be used as both a sealed...
Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use....
Heavy Duty Polypropylene industrial funnels include a molded in handle. Designed to provide convenient filling of carboys, drums, and barrels.
This non-corrosive funnel holder, molded in PP, can hold funnels with diameters of 3" to 6". The extra plate provided can be placed to hold funnels having diameter 1" to 3". Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
KIMAX® funnel with a short, wide stem Constructed with a heavy uniform wall and a strong, fire-polished rim and stem to provide a long service life Funnel has a high resistance to chemical attack and mechanical and thermal shock Designed from ASTM Specification E1095, Type IV requirements...
Cloning cylinders are used to surround a single cell to create homogeneous culture of cells rather than mixed population Flat end insures tight sealing with surface of culture dish