Syringe Filters

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore...

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene...

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to filter...

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Manufactured from Ultra High Molecular Weight (UHMW) foamed porous polyethylene Full flow design removes small particulates Fits securely on the end of a 1/8” cannula sample probe

Minisart HF: Sterile filtration and particle removal. These ready-to-use syringe filter with Polyethersulfone (PES) membrane have excellent flow speed and high filterable volume.

EZlabpure™ syringe filters are optimized for efficient sample prep of both aqueous and organic solutions. Ideal for removing particulates and clarifying samples before techniques like HPLC, IC, and GC, they’re also suitable for biological fluids, water-based media, and mild acids or...

Ideal for aqueous (non-acidic) or organic sample preparation and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and mechanical stability, Nylon offers the best combination of physical parameters to meet the most stringent analytical...

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile, single-use...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

EZlabpure™ syringe filters are ideal for processing both water-based and solvent-based solutions, providing superior chemical compatibility and rapid filtration efficiency. Available in multiple membrane types with pore sizes of 0.2 µm or 0.45 µm, each filter is built with a...

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and...

EZFlow 25mm sample prep syringe filters are designed for aqueous and orga-nic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are in a variety of filter...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

This 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™ inlet and Male...

For particulate removal prior to HPLC analysis. Cellulose acetate membrane for biological or protein-based samples. Low nonspecific binding with limited chemical resistance. Good flow rate characteristics. HPLC certified Cellulose Acetate membrane Medical grade, virgin polypropylene housing Protein...

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

mdi Hydrophilic Polypropylene membrane Syringe filters type SYGP incorporate a hydrophilic polypropylene membrane with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique...

PVDF membranes are not recommended for use with acetone, DMF, DMSO, or bases >6N. All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 1.09 Pore Size (µm): 0.45 µm Holdup Volume (µl):<25 sample volume (ml): <10 inlet connection:...<>

mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum throughput...

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from...

Dual Membrane Self-Locking Filter The Dual Membrane Self-Locking Filter for Pipet-Aids® eliminates the possibility of cross-contamination due to over-pipetting. This unique protective filter which incorporates both 0.8µm hydrophilic and 0.8µm hydrophobic membranes to prevent further use once...

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables Best recovery...