Wheaton Lyophilization Vials

Wheaton Lyophilization Vials

Products (697)

Compare Tool

Select up to 3 products

  • > Next
  • Filter vial

    Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Preassembled R.A.M.™ 9mm Ribbed Screw Thread Cap with PTFE/Silicone Septa

    Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

  • Headspace Vials, Standard 22 x 38 Crimp Top

    Headspace Vials, Standard 22 x 38 Crimp Top configurations or Screw top configurations Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to...

  • Aluminum Seals

    DWK Life Sciences (Wheaton)

    Tear-Off, Tear-Out, or Flip Cap

  • Standard Opening Screw Thread Vials

    Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast and easy. Color-coded...

  • Conical Inserts

    J.G. Finneran

    Due to the conical design of the snap plug, limited volume inserts used in the shell vial stay centered and straight allowing for easy sample evacuation. Finneran black polypropylene inserts protects light sensitive samples from having a chemical reaction during sampling testing and storage. The...

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    40% larger opening than standard narrow opening vials 12 x 32 mm Tightly controlled crown for improved crimping Precision-formed neck designed for optimal robotic arm handling The wide opening crimp cap provides a larger taget area for improved autosampler needle accuracy. Select from four cap...

  • Microvolume Inserts For Wide Opening Vials

    Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts have...

  • 11mm Snap Top Caps™

    Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off by hand which eliminates...

  • Snap Caps with Septa

    Agilent Technologies

    11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Limited Volume Insert

    DWK Life Sciences (Wheaton)

    Limited Volume Inserts

  • Standard screw-thread autosampler vials

    Constructed of borosilicate glass. Vials use 8mm septa and screw-caps

  • Bonded Screw Cap & Septa

    Agilent Technologies

    The Agilent 12 mm bonded screw cap & septa in blue color, is suitable with Agilent, Perkin Elmer, Shimadzu, Thermo and Varian/Bruker auto samplers. This cap & septa made of PTFE/silicone supports GC and LC technique. This product is only available to U.S. Domestic Customers. For research use only,...

  • Target 10 mm Screw Caps With Septa

    Pre-assembled caps with Septa 10-425 thread finish

  • Limited Volume Inserts

    labForce® (powered by Thomas Scientific)

    labForce® Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce® 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample removal...

  • Solvent Vial Kit

    Agilent Technologies

    The Agilent Technologies solvent vial kit includes clear cap of 20 mm size which is made of high-quality polypropylene material. The Bi-Layer septa is made of PTFE/silicone material and has GC, GC & GC/MS, LC, LC & LC/MS technique. This product is only available to U.S. Domestic Customers. For...

  • Standard Opening Screw Thread Vials

    Components packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa that fits into bench drwer for easy access. Packaging keeps products visible and particle free. Convenience Packs come ready to use.

  • Crimpers Hand crimper

    MilliporeSigma

    The Supelco hand held crimper provides a consistent and dependable seal that allows secure vial closure each and evey time. The high quality construction is engineered for durability and long life to provide a smooth and simple operation.

  • Screw cap (open-top)

    MilliporeSigma

    These hole caps do not come with septa. Application: It may be used in HPLC analysis, for quantifying adsorption of the three cationic membrane-active peptides mastoparan X, melittin, and magainin 2.

  • 2 ml Vial Caps/Septa

    Agilent Technologies

    Agilent 2 mL crimp top vials are crimp vials constructed from type 1 borosilicate glass. The unique low metal content nature of the high-quality material can help to protect your sample from destabilizing or leaching. Our associated crimp vial caps come with a choice of either PTFE/silicone, PTFE...

  • Septa

    Agilent Technologies

    For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Septa, tan PTFE/silicone

    Application: Septa, tan PTFE/silicone may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).

  • Insert for 2 mL standard opening vial

    Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

  • Molded & Prescored PTFE & Silicone Liners & Plugs for Patented 96-Well Multi-Tier MTP System

    The Liners designed specifically for the 96-Well Multi-Tier Micro Plate preserves sample integrity and prevents cross contamination. Our sealing systems prevent evaporative losses and contamination from ambient air. The PTFE faced medical grade silicone liners meet U.S.P. Class VI requirements....

  • > Next

Compare Tool

Select up to 3 products