Thomas Brand: Filters

Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting...

Qualitative cellulose filter papers perform separation by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media is widely used in methods requiring the determination and identification of particulate in both liquids and gas. Also, this natural...

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation counting and...

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately 0.23 mm; 24...

Designed for general qualitative laboratory work Medium filtering speed; 6 µm particle retention Medium retentivity, which retains medium crystalline precipitates such as aluminum phosphates, barium carbonate and lead chromate Thickness approximately 0.15 mm 6 µm pore size

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and hydrophobic interactions similar to...

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are...

Depth filtration glass micro fiber GRADE E - Fine porosity, fast flow rate, with a 1.3 µm size particle retention. This material is an economical media for suspended particle analysis in water, cell harvesting, pre-filtration and air monitoring applications. Binderless borosilicate glass...

Designed for very fine precipitates Slow filtering speed; 1 µm particle retention High retentivity, which retains very fine crystalline precipitates such as cuprous oxide, lead sulfate, barium sulfate and manganese carbonate Thickness approximately 0.20 mm, 1.5 µm pore size

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively binds trace proteins.

The labForce® Premium Cell Strainer system is a fast and easy-to-use solution for detaching, isolating and straining cells from clusters and tissues. A polypropylene frame supports a nylon mesh that is available in three color-coded porosities: 40μm (blue), 70μm (white), and 100μm...

A deep black, qualitative paper for filtering light colored sediments, etc. Medium speed Retains crystalline precipitates of medium fineness 6 µm pore size

Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass...

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28 mm Basis...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a very low binding capacity for...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they are ideal for the filtration of...

The labForce® Solvent Filtration Bottle Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce®’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded...

Extremely low protein-binding Wide bottle opening for easy pouring Individually wrapped, peel-open packaging Engraved graduations Connector fits multiple hose diameters Certified non-pyrogenic & gamma irradiated Filtration tops fit on 45mm neck bottles 45mm neck size The Denville 250ml, and...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for filtration of aqueous or...

I.W. Tremont offers a diverse product line of high quality membrane filters available in a variety of materials, diameters and pore sizes and suitable for a wide range of applications including cell retention, In Vitro Diagnostics, particle collection, clarification and sterile filtration of aqueous...

Depth filtration glass micro fiber GRADE B - Fine porosity, medium to fast flow rate, with a 1.0 µm size particle retention. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. This material is twice as thick as Grade A with a higher loading...

Quantitative cellulose filter papers are primarily used in gravimetric analysis procedures and perform separations by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media family is also widely used in methods to prepare samples for further...

Depth filtration glass micro fiber GRADE F - Fine porosity, medium flow rate, with a 0.7 µm size particle retention. Frequently used with Grade D to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for TCLP...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use as a prefilter in series with...