Meters & Monitors

For liquids lighter than water Models 6025F10 through F20 are for testing small quantities Models 6025C10 through C25 require a cylinder 340 x 38 mm diameter and approximately 250 mL of liquid for submersion. Models 6025F10 through F20 require a cylinder 150 mm deep x 25 mm i.d. and approximately 50...

The labForce® M1000 Benchtop pH/mV/ISE/Conductivity/DO Meter features automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose. It has three measuring modes for your specific measuring needs:...

This Hydrometer Set consists of eight DURAC® Specific Gravity / Relative Density (g/cm?) Plain Form Hydrometers for measuring specific gravity of heavy and light liquids in various ranges from 0.700 to 2.000. It also includes one Enviro-Safe® Total Immersion Thermometer to reference liquid...

The labForce® TS-D200 Portable pH Meter is designed for professional pH measurement of dairy products (milk, buttermilk cream, yogurt, etc.) and other liquid food such as jam, BBQ sauce, syrup, etc. The 3-in-1 Glass pH/Temperature Electrode uses Proselyte electrolyte, Silver Ion Trap reference...

Easy contact operation Accuracy is 4% + 2 digits Tachometer reading range is from 10.000 to 99,000 (resolution 0.001, 0.01, 0.1, 1). In addition, it reports results in feet per minute (3.0000 to 30,000), yards per minute (1.000 to 10,000) and meters per minute ( 1.000 to 9999.9). Resolution for all...

Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof...

Large 3 3/16” x 2 1/2” dual display Recall min/max temperature and humidity readings Stand or wall mount Monitor can be used in labs, chemical storage areas, clean rooms, stock rooms, factories or outdoors. Unit can be used to monitor desiccators, incubators, refrigerators and fume...

Used in the chemistry, pharmacology, food and beverage, and starch industries to name a few, these dual scale, plain form hydrometers measure specific gravity / relative density (g/cm?) of liquids lighter and heavier than water in various ranges from 0.700 to 2.00, and Baume in various ranges from...

Touchless handheld point-and-shoot tachometer targets a rotating object and provides instant precision results. Optical no-contact measurements are made by placing a piece of reflective tape on the rotating object. Red LED light locks on the self-adhesive reflective tape (24” supplied) and...

Redi-Stor™ is the ideal solution for storing conductivity probes. It preserves probe’s cleanliness, eliminates growths found when storing in water only, and maintains the probe for immediate use with no conditioning.

1, 2 or 3 point calibration (1 per range) Auto-ranging capability The Russell RL060C is a rugged conductivity meter you can use in the plant or in the field.  Auto-ranging capabilities provide ±1 full scale accuracy with fast, repeatable results. Simple four button operation makes...

Measure concentrations in brix, salinity and a wide variety of other parameters in the field with laboratory accuracy. As small, light and simple to use as optical refractometers, but with the precision of a digital readout. Reads samples as small as 1 ml. Sample temperature is initially displayed...

Waterproof meter with high-accuracy multi-ranging sensor Measure Salinity in aquaculture, environmental studies, ground water, Koi ponds, irrigation, drinking water, and other applications Autoranging with 2 ranges of measurement Built-in NaCl Conductivity to TDS conversion factor Large 3-1/2 digit...

The electrode arm EasyPlace is included with every SevenDirect pH meter. This accessory helps provide precise positioning of electrodes, a tidy workplace and streamlined calibration and measurement. The electrode arm is user-friendly and can be operated with one hand, moving straight up and down,...

Density2Go Two Choices Made for use in the lab and on-the-go, the Densito and DensitoPro are perfect for all applications: from quality control of incoming goods to at-line quality assurance of intermediate or final products. Temperature compensation factors correct the measurement value to the...

NineFocus™ is a high-performance, multiparameter benchtop meter system, ideal for accurate measurements of pH, conductivity, ion concentration, redox potential, and dissolved oxygen. Its modular design effortlessly adjusts to growing needs for additional parameters or increased productivity....

Electrodes 4258A53 electrode allows ORP measurements to be performed with all WTW pH/mV meters. Requires 4258A57 cable for use with Inolab Meters.

pH/ORP/ISE, EC/TDS/Resistivity/Salinity/Seawater Specific Gravity, Turbidity, DO, Temperature and Atmospheric Pressure Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up...

An Advanced, Research-Grade Benchtop pH Meter with Electrode Offering Accurate, Repeatable Results with selectable resolution from 0.1 to 0.001 and an intelligent i-Steward system, AB41PH has high resolution and consistent accuracy. Equipped with a 6.5-inch large LCD display and a touch keypad,...

A.S.B.C. Top Reading Pyrex® Brand Glass Hydrometers High precision A.S.B.C. (American Society of Brewing Chemists) hydrometers used for the determining extract of beer and wort specified and described in Methods of Analysis of the American Society of Brewing Chemists. The top reading hydrometers...

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. API ASTM – The American Petroleum Institute scale is...

The Thermo Scientific™ Orion™ Pro Star PI214 pH/ion bench meter is designed to provide accurate, reliable electrochemistry testing. Featuring an intuitive interface, enhanced data reporting and robust functionality, the Orion Pro Star PI214 meter delivers advanced performance in a modern...

Measures dissolved oxygen to determine water quality in environmental testing, labs, industrial and municipal waste water, aquariums and fish hatcheries. Automatic temperature compensation as well as manual compensation for salinity and altitude (all factors directly effecting DO readings)....

The HI 96821 digital sodium chloride refractometer meets the requirements of the food industry. This optical instrument that employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. It is not intended for sea water...