Agilent Technologies ICP-OES

Analyte: Alachlor, CAS Number: 15972-60-8.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

ZORBAX StableBond 80A C18, 5 µm, bulk media, 2 g Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Bond Elut PRS is a strong cation exchange sorbent that is also relatively high in polarity. With no appreciable degree of hydrophobicity in nonpolar solvents, PRS is capable of polar and hydrogen bonding interactions. Due to the very low pKa of PRS, it is recommended for weaker cationic species,...

The VersaPlate allows you to process more samples in less time with less waste. In its 96-well format, tubes are removable, making this system simpler to use and far more flexible than conventional 96-well formats. You can customize the configuration to different numbers of samples. This product is...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Before exchanging the outlet ball valve, try cleaning it in a sonicator by placing the valve in an upright position (onto the plastic cap) in a small beaker with alcohol. Sonicate for 5 to 10 minutes. The 1100/1200 Series binary pump has a different outlet ball valve which includes a...

Agilent inlet liners for third-party GC systems provide the optimum environment for samples to be vaporized and mixed with the carrier gas in the inlet system. Agilent inlet liners provide the perfect mix of liner configurations and chemistries to solve a wide range of application challenges when...

AdvanceBio RP-mAb columns are designed to optimize the performance of intact and reduced mAb analysis when analyzing monoclonal antibodies for biopharma discovery, development, and QA/QC applications. Analysis of intact and reduced monoclonal antibodies are critical measurements for characterizing...

Scaling up from analytical HPLC to preparative HPLC can be costly and time-consuming. To avoid wasting supplies-and valuable samples-you must reliably predict the separation you will achieve when you scale to manufacturing levels. Agilent can help you rise to the challenge-whether you are scaling a...

The Agilent Technologies standard PM kit is the perfect kit to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Contains 10 mg/L each of Li, Y, Ce, Tl and Co in a matrix of 2% HNO3.

Chem Elut S for supported liquid extraction (SLE) features an inert, synthetic sorbent and is ideal for biological, food, and environmental samples. Compared to traditional liquid-liquid extraction methodologies, SLE extraction reduces time and labor-intensive steps. In SLE, an aqueous sample is...

InstantPC (formerly ProZyme) labeled glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. These standards come pre-labeled with InstantPC, ready to reconstitute and inject. Better detection of low abundance N-glycans in your LC/FLD or LC/MS method translate...

AdvanceBio Glycan Mapping columns are designed and manufactured to deliver fast, high resolution, reproducible glycan identification using HILIC chromatography. Two UHPLC configurations are available: 2.7 µm superficially porous, for high resolution and lower backpressure, and 1.8 µm for highest...

The Agilent Technologies baffled spray chamber features a cyclonic design with a ball joint and the borosilicate glass construction endures heavy impacts. Application: For Ball-Joint Injectors, for NexION, PerkinElmer ICP-MS Instruments This product is only available to U.S. Domestic Customers. For...

The gold seal forms a leak-free seal with the bottom of the inlet body and column ferrule to minimize both sample contamination and sample loss. Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal-to-noise ratio, increase column bleed, and even...

Analyte: Acetone, CAS Number: 67-64-1.

Bonded PLOT column technology Suitable for light hydrocarbons and sulfur gas Retention stability not affected by water Separates CO and CO₂ on a single column Ideal PLOT column for CG/MS - no particles Temperature limits: -80° to 260°/300°C Similar phase: CP-Silica PLOT...

Analyte: Aldrin, CAS Number: 309-00-2; Analyte: Atrazine, CAS Number: 1912-24-9; Analyte: Alachlor, CAS Number: 15972-60-8; Analyte: cis-Chlordane, CAS Number: 5103-71-9; Analyte: trans-Chlordane, CAS Number: 5103-74-2; Analyte: 4,4'-DDD, CAS Number: 72-54-8; Analyte: 4,4'-DDT, CAS Number: 50-29-3;...

Analyte: 2,3,4,6-Tetrachlorophenol, CAS Number: 58-90-2.

The Agilent Technologies cesium 100 mL single element standard with concentration levels of 10000 ug/mL contains no contaminating elements and is made from pure materials. The concentration levels of this standard helps in diluting the working solutions and is ideal to be utilized as a stock blend...

HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

Tubing kit, for G5664A bio-inert fraction collector. incl. bio-inert PEEK tubings G5664-86703 and G5664-86706, and PEEK finger-tight fitting 0100-1516. Application: For G5664A Bio-Inert Fraction Collector This product is only available to U.S. Domestic Customers. For research use only, not to be...