Agilent Technologies ICP-OES

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Bond Elut Carbon cartridges are packed with ultrapure graphitized carbon particles that have been optimized for the absorption of pigments in food, fruits, vegetables, and small organic residues in wastewater. The powerful retention mechanisms of these products are appropriate for a broad range of...

Calcium 10.0 wt%

Bond Elut LMS polymeric sorbent lets you elute without having to add amine modifiers, buffers, or acids. The elimination of secondary interactions means that elution of analytes can be achieved with pure organic solvents, or solvent mixtures of low ionic strength compatible with the HPLC mobile...

The Agilent Technologies C18 SPE cartridge of 30 mg sorbent mass, is used for sample clean-up and analyte concentration preceding in various kinds of chromatography techniques. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Ultron 120A ES-Pepsin Chiral, 4.6 x 150 mm, 5 µm. Ultron Chiral Columns allow for direct racemic separations without derivatization. Visit this Ultron Chiral Columns page to learn more about Ultron Chiral Columns. Agilent Technologies products are intended for sale/shipment within the US only....

Spray chamber tools enable the user to complete routine maintenance on the Mark 7 spray chamber. Maintenance is easy. Special spray chamber tools are required, to remove the nebulizer components which are integrated into the nebulizer block. Application: For Nebulizer Capillary Removal & Replacement...

Spargers have 3 connections Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

AdvanceBio hydrophobic interaction chromatography (HIC) biocolumns deliver robust and reproducible high-resolution separations of native proteins at the intact level. Built using the capabilities of ZORBAX fully porous particles and proprietary bonding technology, AdvanceBio HIC biocolumns provide...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Analyte: Toluene-d8, CAS Number: 2037-26-5; Analyte: 4-Bromofluorobenzene, CAS Number: 460-00-4; Analyte: Dibromofluoromethane, CAS Number: 1868-53-7 ; . EPA, Method: 8260B Obs.

Analyte: tert-Butanol, CAS Number: 75-65-0; InChl: DKGAVHZHDRPRBM-UHFFFAOYSA-N ; Analyte: Isopropyl ether, CAS Number: 108-20-3; Analyte: tert-Amyl methyl ether (TAME), CAS Number: 994-05-8; InChl: HVZJRWJGKQPSFL-UHFFFAOYSA-N; Analyte: tert-Butyl ethyl ether (ETBE), CAS Number: 637-92-3; InChl:...

The Agilent Technologies inlet valve with integrated seal is suitable for use with 1260 Infinity SFC (supercritical fluid chromatography) model. Application: For SFC Pump, For Agilent 1260 Infinity SFC LC. Inlet Valve With Integrated Seal, HPLC This product is only available to U.S. Domestic...

HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Analyte: Aldicarb, CAS Number: 116-06-3.

SPEC disk SPE is a product providing faster sample processing, lower costs, and high-quality results. SPEC is manufactured with ultraclean polypropylene plastic and contains a monolithic sorbent bed with bonded silica infused on a glass fiber disk. For some applications, the elution volume is very...

Agilent provides a range of high-performance column ferrules for various third-party gas chromatography instruments, including PerkinElmer, Thermo Scientific and Varian/Bruker. Graphite, Vespel/graphite, and Vespel column ferrules create consistent, leak-free seals with minimum torque. All column...

HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

Hypersil ODS, 5 µm, 2.0 x 125 mm cartridge (AC) (use with hardware kit 5021-1845) Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies...

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and high...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies silver organometallic standard with concentration levels of 1000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and can...