Agilent Technologies ICP-OES

Agilent Technologies ICP-OES

Products (15082)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Positive pressure manifold 96 processor

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • InfinityLab Poroshell 120 Method Validation Kit

    InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W DB-VRX features unique selectivity, engineered for optimum resolution of volatiles. These low-polarity columns deliver excellent peak shapes and are fully compliant with U.S. EPA methods 502.2, 524.2, and 8260. They are bonded and crosslinked, and require no subambient cooling to resolve...

  • VacElut Cartridge Manifold 12-Port Rack

    The corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. Application: For 13 x 100 mm Tubes, For Vac...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

  • Bond Elut 96-Square-Well Plate

    Agilent Technologies

    Bond Elut 96 square-well plates facilitate transfer from cartridge-based methods to 96-well plate automated formats. The 2 mL wells accommodate the larger processing volumes from older methods, easing method transfer and revalidation. When larger samples or wash volumes are required, the 2 mL well...

  • Bond Elut Solid Phase Extraction Cartridge

    Bond Elut NH2 is a weaker anion exchanger than sorbents such as SAX (a quaternary amine sorbent that is always charged). It is therefore a better choice for retention of very strong anions, such as sulfonic acids, which may retain irreversibly on a SAX sorbent. Similar to Diol and SI sorbents, Bond...

  • WAX Gas Chromatography Column

    Agilent Technologies

    Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature...

  • Special Capillary

    Agilent Technologies

    HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

  • Elbow 1/8inch Stainless

    Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • GC Capillary Column

    Agilent Technologies

    Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

  • Gas Chromatography Column Module

    Agilent J&W VF-5ms is an inert 5% phenylmethyl polysiloxane column that delivers increased sensitivity, accuracy, and instrument uptime. The column has the lowest guaranteed bleed specification of 1 pA at 325 °C (for 30 m, 0.25 mm, 0.25 µm). This column has slightly higher polarity than VF-1ms,...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points. Agilent offers a full range of PEG columns. Even though each phase is based on the polyethylene glycol polymer, strict...

  • Calibration Standard 2000 ug/mL dichloromethane 1X1ML

    Analyte: Acetophenone, CAS Number: 98-86-2; Analyte: 4-aminobiphenyl, CAS Number: 92-67-1; Analyte: 1-Chloronaphthalene (tech), CAS Number: 90-13-1; Analyte: Pentachlorobenzene, CAS Number: 608-93-5; Analyte: Pentachloronitrobenzene, CAS Number: 82-68-8; Analyte: 1,2,4,5-Tetrachlorobenzene, CAS...

  • Pumphead Seal

    Agilent Technologies

    The Agilent Technologies pumphead seal ensures utmost performance of pump in various applications. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • GC Capillary Column

    Agilent Technologies

    Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

  • GC Capillary Column

    Agilent Technologies

    Agilent J&W DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points. Agilent offers a full range of PEG columns. Even though each phase is based on the polyethylene glycol polymer, strict...

  • Flame Ionization Detector Test Mixture 0.033 % (w/w) hexane 1X1ML

    Analyte: n-Tetradecane, CAS Number: 629-59-4; Analyte: n-Pentadecane, CAS Number: 629-62-9; Analyte: n-Hexadecane, CAS Number: 544-76-3 ; .

  • Target alignment, Cary SRA/DRA, 1/pk

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Volatiles Standard 500 ug/mL methanol 1X1ML

    Analyte: Benzene, CAS Number: 71-43-2; InChl: UHOVQNZJYSORNB-UHFFFAOYSA-N; Analyte: Bromodichloromethane, CAS Number: 75-27-4; InChl: FMWLUWPQPKEARP-UHFFFAOYSA-N ; Analyte: Bromoform, CAS Number: 75-25-2; InChl: DIKBFYAXUHHXCS-UHFFFAOYSA-N ; Analyte: Chloroform, CAS Number: 67-66-3; InChl:...

  • O-Ring Kit

    Agilent Technologies

    O-ring kit, complete, with all O-rings used in the demountable torch, for Optima 5/7/8x00. Application: All O-Rings used in the Demountable Torch For Optima 5/7/8X00, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • Bond Elut C8

    Agilent Technologies

    Bond Elut C8 is very similar in property to C18, but is not as retentive for non-polar compounds due to its shorter hydrocarbon chain and therefore reduced carbon loading. C8 is an excellent replacement for C18 when analytes are too strongly-retained for effective elution. The potential for polar...

  • Bond Elut Solid Phase Extraction Cartridge

    Bond Elut NH2 is a weaker anion exchanger than sorbents such as SAX (a quaternary amine sorbent that is always charged). It is therefore a better choice for retention of very strong anions, such as sulfonic acids, which may retain irreversibly on a SAX sorbent. Similar to Diol and SI sorbents, Bond...

  • Tool for needle adjustment

    Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • < Previous
  • > Next

Compare Tool

Select up to 3 products