Agilent Technologies ICP-OES

Analyte: Gamma-BHC (lindane), CAS Number: 58-89-9.

The Agilent Technologies chemical ionization gas purifier is designed to remove any impurities in chemical compounds. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Meets EN14331 Standards (5%-Phenyl)-methylpolysiloxane Non-polar Very low bleed, suitable for GC/MS Exhibits inertness to active compounds Temperature limits are -60° to 325°/350°C Improved signal-to-noise ration for increased sensitivity and mass spectral integrity Bonded and cross-linked Solvent...

Agilent Bio SEC-5 HPLC columns are packed with 5 µm silica particles coated with a proprietary, neutral, hydrophilic layer for maximum efficiency and stability. Our specially designed packing also promotes high pore volume, improving both peak capacity and resolution. Agilent Bio SEC-5 HPLC columns...

The Agilent Technologies end cap locking ring is used for G8400-67150 spray chamber and is compatible for use with for Agilent 7900 and 8900 ICP-MS with UHMI. Application: For Spray Chamber, for Agilent 7900 & 8900 ICP-MS with Uhmi. Used with G8400-67150 Spray Chamber This product is only available...

Graphite-Vespel ferrules are composed of 85% Vespel polyimide and 15% graphite. These ferrules are ideal for MS applications as their nonporous material prohibits oxygen contamination, and they can withstand temperatures as high as 350°C. They are also widely used in GC inlets and detectors as they...

PFTBA calibration kit, perfluoroalkane (FC-43)

Sulfur and Nitrogen Mix Standard Kit

Analyte: 1,2,3,5-Tetrachlorobenzene, CAS Number: 634-90-2. EPA, Method: Individual Analyte.

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is...

Analyte: Linoleic acid, CAS Number: 60-33-3.

The Agilent Technologies silver 500 mL atomic absorption calibration standard with concentration levels of 1000 ug/mL is a single element standard that helps in ensuring the stability and performance of atomic absorption analyses. This product is only available to U.S. Domestic Customers. For...

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum...

EPA, Method: 8270D.

Analyte: Tricosanoic acid methyl ester, CAS Number: 2433-97-8.

Agilent capillary tubing is equivalent to PerkinElmer AA tubing, so you can be confident that it will integrate seamlessly with your PerkinElmer AS-90/90A/90plus/91/93plus/S10 autosampler. Application: Sample Tubing, For as Stainless Steel Probe, For FIAS, For AS-90/90A/90Plus/91/93Plus/S10...

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The VersaPlate allows you to process more samples in less time with less waste. In its 96-well format, tubes are removable, making this system simpler to use and far more flexible than conventional 96-well formats. You can customize the configuration to different numbers of samples. This product is...

J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and...

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W...

Bond Elut SAX is a strong anion-exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion-exchange sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

The analytical technique known as thermal desorption (TD) provides the ability to measure volatile contaminants in air, toys, building materials, car cabins, and food. When the TD systems from Markes International are combined with Agilent GC and GC/MS systems, the results meet current requirements...

Analyte: Teflubenzuron, CAS Number: 83121-18-0.