Agilent Technologies ICP-OES

Agilent J&W CP-Molsieve 5Å is a molecular-sieve-coated PLOT capillary column specially suited for high-resolution separation of permanent gases. Analysis times are reduced by up to 75% compared to packed columns. Baseline separation of Ar/O2 is achieved at ambient temperature. The column's...

The Agilent Technologies bismuth 500 mL atomic absorption calibration standard with concentration levels of 1000 ug/mL is a single element standard that helps in ensuring the stability and performance of atomic absorption analyses. Application: For AA and MP-AES This product is only available to...

Agilent InfinityLab Quick Connect and Quick Turn fittings are truly high-pressure, finger-tight fittings for connections onto columns or other instrument positions for your HPLC & UHPLC. These HPLC column connectors have innovative spring-loaded design to ensure zero-dead-volume connection, helping...

Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other...

Agilent manufactures a range of high-quality loop capillaries suitable for use with a variety of autosampling equipment. Loop capacities vary from 8 µL up to 900 µL. Agilent offers both stainless steel and PEEK loops for different pressure ranges and applications. All loops are manufactured to...

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal...

Agilent APTS (formerly ProZyme) labeled glycan standards are commonly used for qualitative N-glycan identification or as migration standards for capillary electrophoresis with laser-induced fluorescence (CE/LIF). CE offers a powerful technique for glycan analysis. Pre-labeled standards ensure that...

J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and...

The Agilent fully automated modular VGA 77 vapor generation accessory is used with Agilent flame AA systems to. enables rapid trace level determinations of mercury and other hydride-forming elements at parts-per-billion (µg/L) concentrations using the vapor or hydride generation technique. The VGA...

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature...

The Agilent Technologies GC EU PAH standard with a volume capacity of 250 mL is used in chemical laboratories and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent LC & LC/MS calibration standard for mass spectrometry are ready-to-use liquid formulations that can quickly calibrate thermo scientific instrumentation. This highly pure standard offers long shelf life. This product is only available to U.S. Domestic Customers. For research use only, not...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

SA10 Streptavidin (formerly ProZyme) is our longest-established streptavidin product, being a widely-used workhorse of the industry for over 25 years. It is purified to a high degree from fermentations of Streptomyces avidinii and has a molecular weight of 52 kDa (also known as 'core' streptavidin)....

Analyte: Benzene, CAS Number: 71-43-2; InChl: UHOVQNZJYSORNB-UHFFFAOYSA-N; Analyte: Ethylbenzene, CAS Number: 100-41-4; Analyte: o-Xylene, CAS Number: 95-47-6; Analyte: m-Xylene, CAS Number: 108-38-3; Analyte: p-Xylene, CAS Number: 106-42-3; Analyte: Toluene, CAS Number: 108-88-3 . IA UST, Method:...

Analyte: 2,4-Dinitrophenol, CAS Number: 51-28-5. EPA, Method: Individual Analyte.

Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone, and ethyl acetate. They also work well with more polar organic eluents, for example...

One Year Maintenance Kit (2714S21) Includes Big Universal Trap for He (1/8 in.), abrasive sheets (5/pk), lint-free cloths (15/pk), cotton swabs (100/pk), SantoVac Ultra, 18.5 ml (2 each), rough pump oil (1 liter), filament assembly, and Octafluoronapthalene (OFN) MSD Tool Kit (2713M85) includes...

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying...

Our storage screw top vial kits are used extensively in environmental, food, and pharmaceutical applications. Standalone storage screw glass vial and storage screw caps options are available for increased flexibility. Application: For Storage Vials This product is only available to U.S. Domestic...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives...

The Agilent Technologies beryllium single element ICP-OES standard helps in delivering stable results of ICP-OES analyses of instrument calibration materials. This standard helps in obtaining precise, reliable calibrations with an accuracy level of 99.99%. Application: Single Element This product is...