Agilent Technologies ICP-OES

Agilent Technologies ICP-OES

Products (15131)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • EM 200.7 SIC Standard II various concentrations water with dilute nitric acid 125ML

    Analyte: Ammonium metavanadate (ICP grade) (as vanadium), CAS Number: 7803-55-6; Analyte: Chromium (III) nitrate nonahydrate (ICP grade) (as chromium), CAS Number: 7789-02-8; Analyte: Manganese (II) nitrate (ICP grade) (as manganese), CAS Number: 10377-66-9; Analyte: Cobalt nitrate hexahydrate (ICP...

  • VersaPlate Well Plate Tube

    Agilent Technologies

    The VersaPlate allows you to process more samples in less time with less waste. In its 96-well format, tubes are removable, making this system simpler to use and far more flexible than conventional 96-well formats. You can customize the configuration to different numbers of samples. This product is...

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Organochlorine Pesticides Standard 100 ug/mL acetone 1X1ML

    Analyte: Aldrin, CAS Number: 309-00-2; Analyte: Atrazine, CAS Number: 1912-24-9; Analyte: Alachlor, CAS Number: 15972-60-8; Analyte: cis-Chlordane, CAS Number: 5103-71-9; Analyte: trans-Chlordane, CAS Number: 5103-74-2; Analyte: Endrin, CAS Number: 72-20-8; Analyte: Heptachlor, CAS Number: 76-44-8;...

  • GC Pesticide Standard 12

    Agilent Technologies

    GC pesticide Standard 12

  • Bond Elut Solid Phase Extraction Cartridge

    Bond Elut SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • Fraction Collector Supply Delay coil

    Agilent InfinityLab capillary & fitting kits are complete sets of system capillary tubing and fittings, including InfinityLab Quick Connect and Quick Turn fittings, to efficiently ramp up usage of InfinityLab LC Series instruments. Agilent capillary tubing starter kits contain the most widely used...

  • Pursuit Reversed Phase HPLC Guard Column

    The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and high...

  • Autosampler Syringe

    Agilent Technologies

    The Agilent Technologies 5 uL auto sampler syringe with a side hole design contains a 42 mm needle and is perfect to use for small volume injections. Syringe comes packaged in a eco-friendly package and contains a smooth needle that helps in minimizing septum coring to enhance performance. The gold...

  • Packed Gas Chromatography Column

    J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W...

  • InfinityLab Preparative System Standard Capillary

    HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

  • ICP-OES Standard

    Agilent Technologies

    The Agilent Technologies gadolinium single element ICP-OES standard helps in delivering stable results of ICP-OES analyses of instrument calibration materials. This standard helps in obtaining precise, reliable calibrations with an accuracy level of 99.99%. Application: Single Element This product...

  • PL-SAX PL-SAX Column for Biomolecules

    PL-SAX for Biomolecules is ideal for the anion-exchange HPLC separations of synthetic oligonucleotides. The covalently linked strong anion exchange functionality extends the operating pH and temperature range, essential for oligonucleotide purification and analysis. With PL-SAX for Biomolecules,...

  • Bond Elut Solid Phase Extraction Cartridge

    Bond Elut Plexa PAX is a polymeric anion exchange product (PAX) that sets the performance standard in analyte cleanup and reproducibility for polar and nonpolar acidic analytes. Existing polymeric anion exchange sorbents can exhibit various ion-exchange capacities from batch to batch, leading to...

  • SPEC

    Agilent Technologies

    The Agilent Technologies Pt SCX SPE cartridge of 4 mg sorbent mass, is used for sample clean-up and analyte concentration preceding in various kinds of chromatography techniques. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • InfinityLab Poroshell 120 Reversed-Phase Liquid Chromatography Column

    InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

  • Replacement Tubing

    Agilent Technologies

    Agilent provides a range of high-quality HPLC tubing made from PEEK (Polyetheretherketone), PTFE, and other materials to make connections in the low-pressure part of LC flow path. All Agilent HPLC tubing are manufactured to the highest quality standards to protect the integrity of your results at...

  • Methoprotryne Standard 1000 ug/mL acetonitrile 1X1ML

    Analyte: Methoprotryne, CAS Number: 841-06-5.

  • Hypersil ODS, 5 um, 4.0 x 125 mm cartridge (AC)

    Hypersil ODS, 5 µm, 4.0 x 125 mm cartridge (AC) (use with hardware kit 5021-1845) Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies...

  • VersaPlate Pre-Assembled 96-Well Plate

    The VersaPlate allows you to process more samples in less time with less waste. In its 96-well format, tubes are removable, making this system simpler to use and far more flexible than conventional 96-well formats. You can customize the configuration to different numbers of samples. This product is...

  • Solvent Reservoir Inlet Tubing FEP

    The Agilent Technologies solvent reservoir inlet tubing FEP measuring 0.7 mm ID x 1.6 mm OD has LC technique. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Pesticides Surrogate Standard 2000 ug/mL hexane/toluene (1:1) 1X1ML

    Analyte: 2,4,5,6-Tetrachloro-m-xylene, CAS Number: 877-09-8; Analyte: Dibutyl chlorendate, CAS Number: 1770-80-5 . EPA, Method: 8270D.

  • Mixed Standard I various concentrations water with dilute nitric acid 125ML

    EPA, Method: 6010C.

  • ZORBAX HPLC Column

    Agilent Technologies

    The Eclipse PAH (polycyclic aromatic hydrocarbon) column contains a rugged stationary phase suitable for a variety of PAH analyses. Their longevity, reproducibility, and scalability were demonstrated. The large number of available column configurations makes Eclipse PAH columns a desirable first...

  • < Previous
  • > Next

Compare Tool

Select up to 3 products