Agilent Technologies ICP-OES

Bond Elut C18 OH is a nonendcapped version of the octadecyl bonded phases that enables the silanols on the silica surface to be more active. This low-load C18 has well-controlled silanol activity that permits the fractionation of metabolites and enhances retention of basic compounds, compared to an...

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

Agilent J&W DB-1ht is a nonpolar, high-temperature 100% dimethlypolysiloxane column manufactured to the highest levels of quality and stability to deliver excellent performance in a range of GC/MS applications. It is specially processed for operation up to 400 Deg C, with a specially engineered...

The Agilent Technologies solvent reservoir cabinet with LC technique is ideal for analytical applications. It is suitable for Infinity II LC instruments. Application: For Infinity II LC Instruments This product is only available to U.S. Domestic Customers. For research use only, not to be used in...

ZORBAX Eclipse XDB 80A C18, 5 µm, 4.6 x 150 mm cartridge (AC), use with cartridge hardware PN 5021-1845. Agilent ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices formethod development optimizatio Agilent Technologies products are intended for...

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

The Agilent Technologies packed-capillary adapter assembly is suitable for use with 7890B GC (gas chromatography) models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W...

HPLC capillaries are used in the high-pressure part flow path to make connections between different modules and column. All Agilent HPLC capillaries are engineered and manufactured to provide the best fit to Agilent instruments and columns to protect the integrity of your results at every step of...

Agilent InstantAB (formerly ProZyme) labeled N-glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. These standards come pre-labeled with InstantAB, ready to reconstitute and inject. AdvanceBio InstantAB G2F / FA2G2 N-glycan standard (formerly ProZyme)....

Agilent J&W DB-17 is a (50%-phenyl)-methylpolysiloxane column of mid polarity. Equivalent to USP phase G3, it is excellent for confirmation analysis. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent J&W CP-Wax 58 FFAP CB column is a nitroterephthalic acid-modified, chemically bonded polyethylene glycol phase. It is designed for the analysis of acidic compounds, such as phenols, and underivatized as well as derivatized free fatty acids. This product is only available to U.S. Domestic...

Agilent Microsorb is the stationary phase of choice if your ultimate goal is preparative liquid chromatography. The Microsorb column line is made up of eight different phases to address all your application needs. Four particle sizes are available which offer even more flexibility in preparative...

Agilent J&W DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points. Agilent offers a full range of PEG columns. Even though each phase is based on the polyethylene glycol polymer, strict...

Agilent J&W DB-1 is nonpolar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, crosslinked and solvent rinsable, and is equivalent to USP phase G2. This product is only...

Bond Elut SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

The Agilent Technologies vial screw cap is made from polypropylene material and prevents a leak-proof seal for Archon purge and trap, 40 mL vials. Application: For Archon purge and trap, 40mL Vials This product is only available to U.S. Domestic Customers. For research use only, not to be used in...

J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and...

Analyte: Aroclor 1268 (PCB 1268), CAS Number: 11100-14-4.

The Agilent Technologies 1 mm sampling probe is made from epoxy polymer for durability and the PTFE lining on the surface provides good corrosion resistance. Application: For AS-90/90A/90Plus/91/93Plus/S10 Autosamplers. Suitable for inOrganic Acids & Most Organic Solvents, Except NMP This product is...

Polystyrene standards are the first choice for many organic solvents, either for conventional GPC column calibration or for calibrating light scattering and viscosity detectors. Our organic polymers covering a range from 162 to 15 million g/mol, with MWs selected to provide equidistant calibration...