Agilent Technologies ICP-OES

Analyte: Benzene, CAS Number: 71-43-2; InChl: UHOVQNZJYSORNB-UHFFFAOYSA-N; Analyte: Chlorobenzene, CAS Number: 108-90-7; InChl: MVPPADPHJFYWMZ-UHFFFAOYSA-N ; Analyte: 1,1-Dichloroethene, CAS Number: 75-35-4; InChl: LGXVIGDEPROXKC-UHFFFAOYSA-N; Analyte: Toluene, CAS Number: 108-88-3; Analyte:...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature...

PLOT columns are ideal for separating compounds that are gases at room temperature. The Agilent J&W Alumina and Q PLOT Intuvo GC Columns are recommended for the analysis of fixed gases, low moelcular weight hydrocarbon isomers, and volatile solvents. This product is only available to U.S. Domestic...

2,3,3',4,5-Pentachlorobiphenyl Standard (BZ-106)

The Agilent Technologies insertion tool is suitable for L'vov platforms and PerkinElmer GFAAS systems. Application: For L'Vov Platforms, PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Bond Elut Certify extraction cartridge is a mixed mode sorbent containing nonpolar and C8 strong cation exchanger functionalities. Certify is most commonly used to extract basic (cationic) drugs from urine and blood, but is also effective for the extraction of many compounds from a diverse range...

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives...

Conductivity/TDS , Solution (5000 µmhos)

This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies interface to Agilent 3396 integrator cable is suitable for use with BCD functionality. Application: For BCD Functionality This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Analyte: Oxamyl, CAS Number: 23135-22-0.

Agilent J&W CP-TCEP for Alcohols in Gasoline is a highly polar phase, engineered for the analysis of alcohols and aromatics in gasoline. It is able to elute aliphatic compounds smaller than n-dodecane before benzene, avoiding confusing aliphatic and aromatic fractions. This product is only available...

Native silica is generally regarded as the most polar SPE sorbent available. Bond Elut SI is particularly effective at separating compounds with a very similar structure. Applying the analytes in a non-polar solvent, then increasing the solvent polarity by increasing the concentration of a polar...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Chemical modifiers are used in graphite furnace atomic absorption spectrometry (GFAAS) to change the thermochemical behavior of both the analyte and the sample matrix. Modifiers may be used both to stabilize the analyte, thus allowing higher ash temperatures, and to move the atomic signal away from...

The Agilent Technologies zirconium 500 mL single element standard with concentration levels of 1000 ug/mL contains no contaminating elements and is made from pure materials. The concentration levels of this standard helps in diluting the working solutions and is ideal to be utilized as a stock blend...

InfinityLab Poroshell 120 HILIC columns for hydrophilic interaction liquid chromatography (HILIC) are designed for the retention and high-resolution separation of small polar analytes. The superficially porous character of the particles decreases equilibration times to improve throughput for both...

The Agilent Technologies CLP instrument calibration solution is used in the analysis of Perkin Elmer samples. Application: For Perkin Elmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Analyte: Arsenic (III) oxide (ICP grade) (as arsenic), CAS Number: 1327-53-3; Analyte: Selenium (IV) oxide (ICP grade) (as selenium), CAS Number: 7446-08-4; Analyte: Cadmium nitrate hydrate (ICP grade) (as cadmium), CAS Number: 10022-68-1; Analyte: Thallium (I) nitrate (ICP grade) (as thallium), CAS...

Analyte: Pentachlorobenzene, CAS Number: 608-93-5; Analyte: Pentachloronitrobenzene, CAS Number: 82-68-8; Analyte: Chlorpropham, CAS Number: 101-21-3; Analyte: Dichloran, CAS Number: 99-30-9; Analyte: 4,4'-DDT, CAS Number: 50-29-3; Analyte: Alpha-BHC (alpha-HCH), CAS Number: 319-84-6; InChl:...

The Agilent Technologies magnesium 500 mL single element standard with concentration levels of 10000 ug/mL contains no contaminating elements and is made from pure materials. The concentration levels of this standard helps in diluting the working solutions and is ideal to be utilized as a stock...