Static Eliminators

The SCS adjustable wrist strap with dual 4 mm snaps, ensures electrical connection of people and other conductors to ground connection, within ESD protected area. It is made of high quality material which ensures durability and long lasting usage.

The 3M Adjustable Wrist Straps 4600 Series feature a thermoplastic band with an integrally molded conductive interior. The wrist strap utilizes easy on/easy off adjustable zipper style latching.

The SCS rectangle mat roll kit measuring 3 Feet x 50 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality 3-layer vinyl material, which ensures durability and long lasting usage.

The 3M Ionized Air Gun 980 Is An Excellent Tool For Blowing Particulate Contamination Off Of Any Surface. It Releases A Balanced Stream Of Compressed Ionized Air That Neutralizes The Static Charge That Can Hold Particulates To A Surface.

The Ricca Chemicals potassium pyroantimonate TS (test solution) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

Heel Grounder Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 volts Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 High Visibility Neon Lime Green...

12 Foot (24 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the...

Have static protection and heat protection in a clean room compatible glove. FG gloves use monofilament Nomex® woven fabric suffused with carbon fiber and enhance the heat protection with a 100% inner insulating tricot knit polyester fabric liner.Gloves resist up to 572° F (300°C)

ESD workstation kits provide a ESD safe work surface and grounding supplies for handling static sensitive products. The kit includes a 16 x 24" ESD rubber mat which has a dissipative top layer and a conductive bottom layer. The mat is grounded with a low profile common point ground...

Dual Conductor wrist strap sets are used to maximize ESD protection. These specialized bands use two contact circuits to create a two paths two ground. WB0050: An expandable Speidel®* metal band available in small, medium and large sizes.

The SCS 2381 series metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage. Premium metal...

ION-100A Ionizer optimizes the accuracy of results when weighing extremely finite samples by mitigating static charges that can lead to inaccuracies. ION-100A eliminates static electricity on plastic and glass weighing vessels which are particularly prone to attracting static charges. The ION-100A...

Anti-Static workstation mats are made of a durable 2-ply rubber that offers excellent resistance to hot solders, soldering irons and most solvents. A conductive layer backs the static dissipative top layer that creates outstanding electrical performance characteristics.  Includes two installed...

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent, controlled static drain and physical properties with highest level of protection. 0.0625″ thick. Resistant to degradation by inorganic acids, organic acids, reducing agents, detergent...

The perfect solution for grounding chairs or carts in an industrial or manufacturing environment. The VinylSTAT FM7 is made of a rigid conductive vinyl that protects carpets from wear and tear while providing a path-to-ground for static charges. The ESD properties of the matting are permanent and...

The CrossFLOW ionizing blower produces a powerful air flow, rich in positive and negative ions that quickly neutralize static charges. Powered by inherently balanced AC technology, the ionizer provides a stable output with exceptionally fast decay performance. The CrossFLOW features built-in emitter...

Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274°C (525°F). Completely smooth surface offers "zero absorption"; easy to clean Meets US Pharmacopoeia specifications for Type I Borosilicate glass Autoclave...

The HG4560 Disposable Heel Grounder from Transforming Technologies is the perfect solution for plant/manufacturing/esd assembly room visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Constructed of a durable non-woven fabric impregnated...

The SCS metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage. Premium metal expansion...

The work station ionizer effectively eliminates all static charges within 36" of the unit. The operation of the work station ionizer is simple; place the unit on a flat surface and turn the power on. Unit features include; ion pulse rate adjustment, ion balance adjustment and a compact...

This device operates on a piezoelectric effect to emit positive (trigger squeeze) and negative (trigger release) charges to neutralize static on virtually any surface. The gun remits no radioactivity and it does not require electricity or batteries. The unit measures 4" x 6".

The SCS large metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. This wrist band with dual wire conductors and 3.4 mm plug, is made of high quality material which ensures durability and long lasting usage.

Transforming Technologies FM2525 is used to interconnect two monitored work surfaces. A straight cord with male snap fasteners at each end and no resistors. The FM2525 comes with two molded low profile mushroom caps with 3/8? (10mm) male snaps ensure a secure connection to mats.