Laboratory Shakers

Back-To-Basics II Rocker Compete - 230V W/10x12 Tray

The 2D Platform Rocker is excellent for a gentle mix of solutions, reagents, blotting and staining applications. It has a high-quality motor for durability and ultra-quiet operation. Space saving design and simple to operate make this a popular item for any laboratory.

The Corning LSE Digital Microplate Shaker features digital control of shaking speed and run time. A single control knob is used to set parameters, and values are shown on a large 3-digit display. A sturdy base encloses the motor for quiet, vibration-free operation. The included stainless steel...

Electronic speed control with LED display Digital timer Alarm indicates set time has expired IP 21 protection class The MTS 2/4 digital microtiter is specially designed for shaking two to four microplates. Orbital diameter is 3 mm. Speed range is 0 to 1100 rpm, Unit operates in continuous or timed...

It can be connected with three adapters for inserting into universal attachment, suited for shaking tasks with all small vessels and microtiter plates Adapters detection Continuous or touch operation Stepless speed regulation of motor which with electronic speed control, constant speed can be...

Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used to fasten lid...

PS-3D fixed tilt 3D platform rotator Variable speed, fixed-angle 3D rocker-rotator in the Grant bio range providing smooth orbital motion for mixing in commonly used vessels – culture flasks, dishes, boxes and tubes. Suitable for use in cold rooms and incubators. Variable speed: 5 to 60 rpm...

The Orbital Shaker may be used for several applications including culturing microbes, washing blots, and general mixing. A spring platform is an available accessory which can handle multiple flasks. CTI’s SlientShaker® is designed and built for a heavy workload, and provides continues...

Takes from one to three separatory funnels size 60 to 250 mL Funnel stoppers are held in place by elastic bands. Three adjustable, rubber-covered yokes are used to secure funnels in holder. Spring- loaded release mechanism permits holder to be rotated about shank in 30° increments without...

Gentle motion, for gel applications Large platform, 14x12” Incubator and cold room safe The Orbi-Blotter ™ is the a low speed orbital shaker designed for gel blotting, staining/destaining and washing applications. With accurate speed control down to as little as three rpm. The...

Gentle rocking and rolling action for complete mixing Safe for use in cold rooms down to 39°F (4°C) or in incubators to 140°F (60°C), up to 80% humidity Continuous and quiet operation Choice of analog fixed speed or digital variable-speed models Solidly constructed roller shakers are...

Three models to satisfy all your needs Operates in temperatures from 4 to 55°C 12” square platform Removable mat for easy cleaning and tube support Accepts a wide variety of tubes simultaneously without the need for racks or clamps Thin power cord allows use in cold room or incubator...

Like the popular MultiTherm, the MultiTherm Touch features a broad temperature range to meet applications from denaturation of DNA to keeping samples cold (4°C) at the end of a protocol. An expanded speed range (to 3,000rpm), full-color touch screen, greater flexibility in programming and heated...

Easiest to Use in the Market with Onboard Adjustments for Tilt Angle OHAUS Rocking and Waving Shakers are designed for use in a range of lab applications in a variety of environmental conditions. Rocking Shakers provide a seesaw-like motion, while Waving Shakers offer a smooth, low-foaming, 3D wave...

30" x 18" (76 x 46 cm) Aluminum unless otherwise stated below. Not interchangeable with other 30" x 18" platforms.

Drum For Culture Tubes

Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt Stainless steel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 (Holds 90 13mm tubes) Thomas No....

General purpose shaker Displays for speed and time 3mm or 15mm orbit 2 year warranty Talboys Advanced 1000-3 and 1000-15 Orbital Shakers are ideal for a wide variety of shaking applications. Tray includes a non-skid rubber mat. Remove mat to mount a variety of optional flask clamps or test tube...

"MINI BLOT ROCKER 3D W/7.5" X 10.5" PLATFORM"

The E6140.00 is a powerful benchtop orbital shaker, designed for rotary swirling action and used for the bioprocessing of plant cell cultures, mammalian cell culturing, aeration in fermentations, and various other chemical mixing procedures. Eberbach’s E6140.00 benchtop variable speed orbital...

Benchtop open air platform shaker for use with interchangeable platforms, clamps, and test tubes For shaking in ambient conditions: on the bench, in an incubator or in a warm or cold room, the Innova Platform Shakers are the instrument of choice. Dependable operation is due in large part to the New...

Variable Speed: 4-18 rpm LCD display Includes 260751 Carousel for thirty-six 1.5/2.0ml tubes Provides complete 360° Rotation An adustable 0-90° Mixing Angle Small footprint for your bench — we know you need all the space you can get! Interchangeable carousels for all common laboratory...

The Bellco btbII “back-to-basics” Reciprocating Shaker provides an easy to use shaker for light duty applications. It provides the gentle back-and-forth motion required for many lab applications, including many hybridization and gel agitation procedures. Speed is controlled with a numbered dial...

The Bellco Bench-top 12 V Micro Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 60 to 1150 RPM and have a 5 minute timer...