Lab Evaporators & Concentrators

A Rotary Evaporator designed so you can focus on your research: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Clear digital display showing actual and set values Two separete knobs with dynamic control for setting the rotation speed and...

Thermo Scientific™ Savant SpeedVac™ DNA130 is a compact, integrated vacuum concentrator designed for fast, efficient concentration of DNA and RNA applications. SpeedVac™ DNA130 vacuum concentrator will support sample preparations with ease and efficiency. Compact, easy to use...

The 34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the...

These easy-to-use thermal seals work with all heat sealers that use pre-cut strip seals.  Each aluminum foil is spray-coated with an acrylic varnish that is solvent resistant and will not contaminate samples.

Glass purge adapters for use with popular brands of rotary evaporators. Top has 35/25 socket joint for joining with the trap or condenser. The bottom has a 35/25 ball joint for connecting to the receiver flask. The middle or purge tube has either a 2mm PTFE stopcock or a 2mm valve to allow for...

A wide range of measurement and control, 1-1,000mbar Two control modes of single-point control and programmed control available for choice as needed Can store up to 5 programs, each containing up to 5 segments of programming control A large-size TFT touch screen display control allows easy operation...

Anodized aluminum block with 12 bore holes that accommodate 1.7 ml microcentrifuge tubes. Holder may be placed on any flat freeze drying surface such as inside Clear Chambers, Heated Drying Chambers or the built-in vacuum drying chamber of FreeZone Console Systems; or on FreeZone Stoppering or Bulk...

The 45 Position N-EVAP® nitrogen evaporator offers the largest number of sample positions in the N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm. The inner ring has 15 positions and can...

For use with Labconco CentriVap Vacuum Concentrators. Stainless steel and PTFE coated options available. To prevent loss of sample during centrifugation, limit sample volume to 30-50% of total sample container volume.

Thermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The Savant...

The S-EVAP-KD® solvent evaporator combines standard Kuderna-Danish concentration procedures with a unique rotary water bath and manifold, increasing sample throughput and conserving bench space. The instrument comes in 5, 8, and 10 position models. The S-EVAP-KD instruments are available in two...

Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost” is 300 W of...

The 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can...

For gravimetric oil and grease Three position linear system Heating mantle, controller and splash guard are required for complete system (clamps and support included): power 15 amps - 115 volts. Refrigerating circulator recommended for system water coolant: -4°C. Proper ventilation under a hood...

Widely used to concentrate samples, particularly pesticides and other pollutants prior to instrumental analysis Includes a two- or three-ball Snyder column, a flask and a spring-mounted collection tube for convenient access to samples Complete apparatus consists of a Snyder column 150 mm long (with...

Replacement vapor (steam) tube adapter for Büchi® R-200/205 rotary evaporators. Adapters have a 50mm OD top flange with a tapered interior to fit the Büchi® sealing ring. Lower portion of the adapter has the listed standard taper inner joint. Each tube is supplied complete with...

Configure your Thermo Scientific™ Reacti-Therm™ Module to fit your needs with interchangeable Thermo Scientific™ Reacti-Block™ Aluminum Blocks. They are available with many hole configurations and are machine-drilled to accommodate almost any size Thermo Scientific™...

Evaporate samples efficiently and with ease using Thermo Scientific™ Reacti-Vap™ Evaporators. Designed for use with Thermo Scientific™ Reacti-Therm™ Modules, these precision-machined gassing manifolds enable simultaneous or separate delivery of nonreactive pressurized gas to...

CentriVap Cold Traps collect evaporated liquid from a CentriVap Vacuum Concentrator, protecting the accessory vacuum pump and laboratory environment from the effects of vapors and fumes emitted from samples. All models feature a 4L stainless steel collector, illuminated temperature graph, grounding...

Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. This mini-rotary evaporator is designed with slide jack mechanism for...

Fast, unattended concentration of environmental samples Combines mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor...

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to...