HPLC Columns & Fittings

Turn imagination into results with the ProteCol™ range of HPLC columns. With Reverse Phase, Normal Phase and Specialty Phases, ProteCol ensures you have the right phase for your separation needs. With the option of combining inert PEEK coated hardware or traditional stainless steel with each...

I.D. 1/4 in., 1/4 in. O.D. Column Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won't stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite) Maximum Temperature: 400 °C Legal Information Supeltex is a registered trademark of...

Synonyms: TSKgel® SWXL Columns Legal Information: TSKgel is a registered trademark of Tosoh Corporation

Legal Information: Supelguard is a trademark of Sigma-Aldrich Co. LLC

Accucore C18 columns offer optimum retention for non-polar compounds and separation of a broad range of analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations – without the elevated backpressures required by sub-2µm particles. Fast separations...

The ZORBAX PrepHT and Agilent Prep Preparative Cartridge and Guard column hardware kits have been developed to provide a convenient preparative 21.2 mm ID cartridge design. The 21.2 mm ID preparative cartridge columns are reusable and allow rapid change of column lengths from 50-250 mm for...

Provide 60% reduction in mobile phase usage and waste generation compared to a 4.6 mm ID column Provide 2- to 3-fold signal-to-noise (S/N ratio) improvement Deliver optimal LC/MS performance at intermediate flow rates Can be used with most conventional LC instrument configurations without...

LiChrospher® RP-18 is a reliable and versatile traditionally produced spherical silica gel carrier with C-18 reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This  sorbent is packed into a Hibar® 125-4 HPLC column. For...

EC Number: 276-161-8 eCl@ss 32110501 General Description The amino column is most often employed for the separation of mono- and disaccharides. As a normal-phase application, amino columns are used in the petroleum industry. Legal Information SUPELCOSIL is a trademark of Sigma-Aldrich Co. LLC

Asahipak ODP-50 is a microparticulate, macroporous polyvinylalcohol based polymeric packing. Designed for analysis of basic substances. Asahipak ODP-50 columns provide high separation efficiency with buffered and alkaline solutions at high pH. These polymeric columns can be used up to pH 13 with a...

YMC-Triart Diol-HILIC is a HILIC (hydrophilic interaction chromatography) column based on an organic/inorganic hybrid particle synthesized with dihydroxypropyl groups. Triart Diol-HILIC is ideal for a separation of polar and hydrophilic compounds that are not retained by reversed-phase (C18, C8, and...

Purospher® STAR RP-8 endcapped allows best results and highest flexibility due to its widest pH range up to pH 10.5, best performance and separation highest efficiency. Purospher® STAR RP-8 endcapped is suited very well for the separation of strong hydrophobic compounds and peptides.

The Ascentis family of columns is the fourth generation of HPLC column technology from Supelco scientists. Ascentis columns are bonded on high purity, 100 Angstrom silica including 3, 5, and 10 micron particle size. Columns are designed for small molecule applications and are scalable from micro...

Featuring ultra-efficient 4mum particles, TSKgel SuperSW3000 provides higher efficiency than 5mum TSKgel G3000SWxl columns. The 250Å pore size results in a fractionation range up to 500,000 Da for globular proteins. The narrow 4.6mm column inner diameter reduces buffer consumption and is ideal for...

High sensitivity for small sample sizes Compatible with LC/MS interfaces Wide variety of bonded phases MicroBore (1 mm ID) columns are often a good choice when sample sizes are limited. They can improve detection limits 5 times over 2.1 mm ID columns when the same sample mass is used. This increase...

High pressure (600 bar) columns for ultra high speed or maximum resolution analyses with Rapid Resolution HT columns packed with totally porous, 1.8 µm packings Carefully engineered particles deliver maximum resolution at 25% less pressure than other sub 2-micron materials Reduce analysis time...

This precolumn holder is suitable for direct connection to Hibar® HPLC columns.

Accucore HILIC Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures...

Rx-C8 is the same product as SB-C8 *RR: Rapid Resolution 3.5 µm Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Easy scale-up from analytical to preparative scale with ZORBAX phases Fast preparative separations, up to 2000 mg 5 to 7 µm particles for high efficiency and high yield Easy to install finger tight connections seal up to 5000 psi/350 bar High purity, high recovery and high throughput can be...

General Description SUPELCOSIL LC-18-S columns are designed for reliable separations of deoxyribonucleosides and ribonucleosides. Legal Information SUPELCOSIL is a trademark of Sigma-Aldrich Co. LLC

Accucore aQ columns are compatible with with 100% aqueous mobile phases and offer special selectivity for polar analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations...

LiChrospher® Si 60 is a versatile HPLC spherical silica sorbent with a pore diameter of 60A and a particle size of 5µm  for normal phase chromatography: This  sorbent is packed into a LiChroCART® 125-4 HPLC cartridge. The connection to the HPLC system is being...

YMC-Pack Diol is a size exclusion chromatography column utilizing a silica gel base. Diol-120, 200, and 300 are suitable for separation or molecular weight determination of proteins with molecular weights of 10,000 to 1,000,000. Diol-60 is the most suitable for separation of peptides of...