Lab Clamps, Stands & Supports

The clamp includes a high strength alloy Boss Head for securing the clamp to a frame or other apparatus. The Boss Head will accept a rod diameter of 18 mm (approximately 11/16"). Heavy duty spring loaded clamp jaw with dual screw adjustment to fine tune any fitting. Swivel between clamp and Boss...

The arms of the clamp will rotate 360 degrees and can be locked in place. Cast iron construction with rubber coated jaws to prevent slipping. The clamps will accept a tube range of 3/8" to 1-3/8" in diameter.

OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has a...

Base is steel with black enamel finish. Removable rod is zinc-plated steel. Heavy-duty styles have an added steel plate on the back for extra weight.

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Round extension arms allow the...

A cast aluminum clamp with cork lined prongs to hold a flask securely. The jaws open to a maximum of 3". Overall length 9.5".

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

Features:  S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports TWO Reactors side by side from 300mL to 5L.  Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically Adjustable: It accepts our...

Tall form clear quartz glass crucibles are ideal for applications that require ashing of samples. Quartz material offers low expansion, dimensional stability, and thermal shock resistance. Can withstand a continuous operating temperature of 1050°C (1922°F). Lids are also manufactured from quartz and...

Aluminum alloy clamp with plastic clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used on table edges and boards Eisco Labs Multipurpose Clamp Holder, up to 16mm Rods Includes: (1) Clamp This popular clamp holder is made of aluminum alloy with plastic...

Steel support plate for lab use 3.75" diameter plate 6" stem length 8mm stem diameter, 1mm plate thickness Great addition to any lab setup! This steel support plate from Eisco Labs has a 3.75" diameter with a 6" stem length for an 8.75" total length. It is a versatile and durable component of any...

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

0209X58: Tubing Holder for Beakers This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to 1/4" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (3/8") O.D. Autoclavable 0209X21: Dialysis Bag Clip...

Compatable with BriskHeat Metal Housed Heating Mantles. Accommodates up to a 13mm diameter rod.

Strong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.

Designed to hold hotplates, stirrers, hotplate-stirrers, and other apparatus to lab-frames or ring stands. Aluminum construction offers strength and durability. Support plates include a non-skid rubber mat and a built-in holder that grips rods up to 0.75" (19 mm) in diameter.

Heavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is...

Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

Drum Wrench opens drum bung caps. Rugged, nonsparking corrosive resistant tool fits any of seven alternate 2" or .75" styles commonly used on drums. Design of handle protects the hand.

Polymeric Sanitary Clamps: Click-To-Connect. Threadless Sanitary Clamps that do not need tightening, simply click the arm in place! Robust fit up that protects against inconsistent tightening by operators No risk of connection loosening during transit or handling Ensures gasket alignment between...

The support stand for the portable micro butane burner will support GSC's item number BTN-01 portable micro butane burner. The stand is 15.2cm tall, and its platform has a 11.5cm outside diameter and a 8.7cm inside diameter. There is an adjustable support for the butane burner, so the burner can be...

Rod End Connector (2824E29) Holds rods firmly at 90°. Use when semi-permanent installations are required. Comes with two set screws and is precision bored for close fit. S-Connector (2824E33) Clamps lab frame rods at 90° angle. Twin angled screws allow independent rod adjustment and easy...

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Round extension arms allow the...

Model 712 is a rugged cast aluminum clamp that safety secures gas cylinders to benches, tables, or other flat surfaces up to 2.5" (64mm) thick. The 1" (25mm) wide, 54" (1372mm) long nylon strap features a nickel-plated, non-slip spring catch and buckle for easy adjustment around...