Lab Clamps, Stands & Supports

Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and...

Used to hold apparatus near the lab-frame where no adjustment is required after set-up. Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus. Available in 2-prong or 3-prong....

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab clamp - accepts rods up to 3/4" in diameter

Color-coded clamps hold standard taper joints securely under moderate pressure Molded from polyoxymethylene (POM), an acetal resin Will not scratch glass and can withstand temperatures up to 150°C Resistant to bases and weak acids Not resistant to halogen gases and concentrated acids

3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and...

Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.

These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.

Screw Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm (1/2") O.D. Spring...

Joint Clamp, Standard Taper, Plastic, Synthware, Various Joint Sizes Available.

Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous...

Hook Collars are used for attaching pulleys, balances, cords, trusses, pendulums, and other apparatus to support rods. The collars are plated for corrosion resistance and are supplied complete with thumbscrew and hook.

Aluminum support jack. various sizes.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

Double Burrete Clamp Support with Rod and Stand. Alloy jaws are suitable for all burettes up to 100mL. Cast iron blue base measuring 7" wide and 13" long. 12mm diameter stainless steel support rod measuring 24" long. Great for any science or home laboratory. Double Burrete Clamp Support with Rod and...

Flask clamps and universal platforms for shakers. Fits onto standard platforms. Purchase individual pieces to build various configurations. 25x25cm tray accepts 5 51x51cm tray accepts 16

Joins 1/2" Rod frames Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm

Use these adjustable "rubber bands" for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags. Remain flexible from -46°C to 121°C (-50°F to 250°F); use in the...

The Versatile Holder, used with thermometers and tubes, is designed to be clipped on the lip of a beaker or other vessel. The Holder is made from heat resistant materials that will withstand temperatures up to 120?elcius The Holder is suitable for the following sizes of thermometers and tubes. –...

Graduations are always visible The clamps fit standard support rods, 12.5mm (1/2") and includes an adapter to fit to narrower 9.5mm (3/8") rods. Polypropylene is chemical resistant and autoclavable at 121°C (250°F).