Corning PYREX

These  PYREX® dishes have rugged beaded rims Approximately 105x55mm (O.D.xHeight) 290mL

These 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel The plug...

Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body

Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock cannot fall out...

These Class A PYREX® mixing volumetric flasks have an upper bulb, located between the Standard Taper stopper and the capacity graduation to assist in the mixing of liquids or powders when shaken. This bulb is approximately one-tenth the flask rated capacity of the flask. The strength of these...

Allihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip tip joint at bottom and...

These 2L PYREX® Class A graduated cylinders are calibrated "to contain" (TC) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Corning Certificate of Identification and Capacity, traceable to NIST standards. Useful as a mixing...

PYREX® single metric scale cylinder is calibrated "to contain". The scale and figures and durable white enamel, which stand out clearly against the red color band on these Lifetime Red cylinders. The 10 mL size features a funnel top. Bumper guards are supplied with 100-, 500- ,...

Tops are ground to close tolerances to insure tight cover fits 152 mm jar edge is flat within 0.1 mm; all others are flat within 0.25 mm Without covers. Capacity and o.d. x height are shown in listings.

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel...

These are replacement Polytetrafluorethylene (PTFE) Product Standard stopcock plug assemblies with 4mm and 6mm diameter bores for No. 7282 PYREX® straight bore PTFE stopcocks. For more information on PTFE stopcocks, please check the Care of Corning PYREX® PTFE Stopcocks under Technical Literature.

These PYREX® volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for Standard Taper glass stoppers. Stoppers are...

PYREX® Conical Reaction Vial, Standard Taper. These Conical Reaction Vials are a replacement part for the 6949M series of PYREX® microchemistry kits.

These PYREX® 6L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass...

These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length...

These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI...

Pyrex Standard Taper Connecting Tubes (5738E14) Arms are approximately 75° apart Equipped with inner Standard Taper joints that are both 24/40 Often used as a still head adapter Still Head Standard Taper Connecting Tubes (5738H82 and L18) Sidearm is at an angle approximately 75° from the...

These PYREX® chromatography columns have a reservoir at top and a Product Standard 2mm bore PTFE (Polytetrafluorethylene) plug stopcock at the bottom. The top opening will accept a #2 rubber stopper.

Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers

Valves, In-Line, Rotaflo® For vacuum or pressure work Borosilicate glass, with Teflon® stem providing chemically inert seal Require no lubrication Permit precide control of liquid or gas flow at temperatures from -40°C to +200°C Maximum vacuum 10 -8 torr (10 -6 Pa) Plastic control...

These PYREX® bombs are for the determination of gum stability of gasoline. The cover prevents condensed vapors in bomb stem from contaminating the sample, but does not interfere with free flow of oxygen. Made in accordance with ASTM D-525.

These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement PTFE...

This Corning® kit is similar to No. 6949E (Thomas 7177U65), except the components have a 14/20 Standard Taper joint. The PYREX® kit components are held in foam within a polyethylene case. The case is approximately 130mm x 256mm x 343mm. For more detail on individual components of the kit or...