Chemicals Chromatography Reagents

Chemicals Chromatography Reagents

Products (4445)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Total Organic Carbon (TOC) Standard 25 mg/L water (low TOC, < 50 ppb) 250ML

    Total organic carbon (TOC) Standard

  • 1,2,4-Trichlorobenzene Standard 5000 ug/mL methanol 1X1ML

    Analyte: 1,2,4-Trichlorobenzene, CAS Number: 120-82-1. EPA, Method: Individual Analyte.

  • IC Anions Standard various concentrations water (low TOC, < 50 ppb) 125ML

    Analyte: Ammonium (dihydrogen) phosphate - monobasic (as phosphate), CAS Number: 7722-76-1; InChl: LFVGISIMTYGQHF-UHFFFAOYSA-N; Analyte: Sodium fluoride (as fluoride), CAS Number: 7681-49-4; InChl: PUZPDOWCWNUUKD-UHFFFAOYSA-M; Analyte: Sodium nitrate (as nitrate), CAS Number: 7631-99-4; InChl:...

  • Organometallic Standard

    Agilent Technologies

    The Agilent Technologies tin organometallic standard with concentration levels of 1000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and can be...

  • Nitrogen Chemiluminescence Checkout Std

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • AdvanceBio Gly-X Deglycosylation & 2-AB Express Labeling Module Set

    AdvanceBio Gly-X (formerly ProZyme) technology is a new generation of N-glycan sample preparation. Be ready for sample analysis faster with rapid (5-minute) enzymatic release of N-glycans and labeling with InstantDyes including the brightest in class InstantPC, or traditional reductive amination...

  • Acifluorfen Standard 100 ug/mL methyl tert-butyl ether 1X1ML

    Analyte: Acifluorfen, CAS Number: 50594-66-6.

  • Bond Elut SPEC MP3 Cartridge

    Agilent Technologies

    SPEC disk SPE is a product providing faster sample processing, lower costs, and high-quality results. SPEC is manufactured with ultraclean polypropylene plastic and contains a monolithic sorbent bed with bonded silica infused on a glass fiber disk. For some applications, the elution volume is very...

  • 1-Chlorooctadecane Standard 2000 ug/mL dichloromethane 1X1ML

    Analyte: 1-Chlorooctadecane, CAS Number: 3386-33-2. MA UST, Method: EPH; TX UST, Method: 1011; TX UST, Method: 1006.

  • Calibration Standard 2000 ug/mL dichloromethane 1X1ML

    EPA, Method: 8270D.

  • AmphiSpheres 40 RAM 0.4mM/g 75-150um 1Kg

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Flumetralin Standard 1000 ug/mL acetonitrile 1X1ML

    Analyte: Flumetralin, CAS Number: 62924-70-3.

  • Quizalofop-P Ethylt Standard 1000 ug/mL acetonitrile 1X1ML

    Analyte: Quizalofop-p ethyl, CAS Number: 100646-51-3.

  • Benzidine Standard 2000 ug/mL dichloromethane 1X1ML

    Analyte: Benzidine, CAS Number: 92-87-5. EPA, Method: 625.

  • ICP-MS Calibration Standard

    Agilent Technologies

    Agilent metallo-organic standards are the highest quality metallo-organic mixes in the industry, manufactured with rigorous quality control in an ISO/IEC 17025 laboratory. All Agilent AA, ICP-MS, and ICP-OES standards are made from high purity raw materials and matrix acids, and 18 MW deionized...

  • Holmium Perchlorate

    Agilent Technologies

    Holmium perchlorate, 4% in perchloric acid, sealed in quartz cuvette, wavelength accuracy standard. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • N-Glycanase (700 ul) for GlykoPrepPlus

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Atomic Absorption Calibration Standard

    The Agilent Technologies strontium 500 mL atomic absorption calibration standard with concentration levels of 1000 ug/mL is a single element standard that helps in ensuring the stability and performance of atomic absorption analyses. This product is only available to U.S. Domestic Customers. For...

  • Chrysene-d12 Standard 2000 ug/mL dichloromethane 1X1ML

    Analyte: Chrysene-d12, CAS Number: 1719-03-5; InChl: WDECIBYCCFPHNR-AQZSQYOVSA-N . EPA, Method: 680.

  • Simetryn Standard 100 ug/mL acetone 1X1ML

    Analyte: Simetryn, CAS Number: 1014-70-6.

  • Atomic Absorption Calibration Standard

    Agilent aqueous single element standards for AA are certified by high performance ICP-OES (HP-ICP-OES), a technique developed by the National Institute of Standards and Technology (NIST). NIST uses HP-ICP-OES to certify their SRM 3100 series of spectrometric single element solution standards. NIST...

  • Tert-Butylbenzene Standard

    Agilent Technologies

    Tert-butylbenzene Standard

  • Internal Standard 2000 ug/mL methanol 1X1ML

    Analyte: 4-Bromofluorobenzene, CAS Number: 460-00-4; Analyte: a,a,a-Trifluorotoluene, CAS Number: 98-08-8 . EPA, Method: 8020A.

  • Base/Neutrals Surogate Standard 1000 ug/mL acetone/methylene chloride 1X1ML

    Analyte: Nitrobenzene-d5, CAS Number: 4165-60-0; Analyte: p-Terphenyl-d14, CAS Number: 1718-51-0; Analyte: 2-Fluorobiphenyl, CAS Number: 321-60-8 ; . EPA, Method: 625.

  • < Previous
  • > Next

Compare Tool

Select up to 3 products