Chemicals Chromatography Reagents

Chemicals Chromatography Reagents

Products (4445)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • 2-AB Labeled Glycan Standard

    Agilent Technologies

    Agilent 2-AB (formerly ProZyme) labeled N-glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. 2-AB standards come pre-labeled with 2-AB, ready to reconstitute and inject. The sialic acid linkage of the sialylated glycans within the 2-AB library are a(2, 6)...

  • 2,3,4-Trichlorobiphenyl Standard (BZ#21) 100 ug/mL isooctane (2,2,4-trimethylpentane) 1X2ML

    Analyte: 2,3,4-Trichlorobiphenyl (BZ 21), CAS Number: 55702-46-0.

  • 2,2',4,5-Tetrachlorobiphenyl Standard (BZ#48) 100 ug/mL isooctane (2,2,4-trimethylpentane) 1X2ML

    Analyte: 2,2',4,5-Tetrachlorobiphenyl (BZ 48), CAS Number: 70362-47-9.

  • 1,3,5-Trimethylbenzene Standard 100 ug/mL methanol 1X1ML

    Analyte: 1,3,5-Trimethylbenzene, CAS Number: 108-67-8. EPA, Method: Individual Analyte; EPA, Method: 9056A.

  • Acetone Standard 100 ug/mL methanol 1X1ML

    Analyte: Acetone, CAS Number: 67-64-1.

  • ICP-OES Wavelength Calibration Solution

    The Agilent Technologies 500 mL 5 ppm wavelength calibration solution is suitable for use in ICP-OES (inductively coupled plasma - optical emission spectrometry). This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • 3,3',4,4',5-Pentachlorobiphenyl Standard (BZ#126) 100 ug/mL hexane 1X2ML

    Analyte: 3,3',4,4',5-Pentachlorobiphenyl (BZ 126), CAS Number: 57465-28-8.

  • InstantPC Labelled Glycan Standard

    InstantPC (formerly ProZyme) labeled glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. These standards come pre-labeled with InstantPC, ready to reconstitute and inject. Better detection of low abundance N-glycans in your LC/FLD or LC/MS method translate...

  • Bromophos-methyl Standard 1000 ug/mL methanol 1X1ML

    Analyte: Bromophos-methyl, CAS Number: 2104-96-3.

  • Carboxyl PL-Latex

    Agilent Technologies

    Agilent offers a range of polystyrene-based uniform latex particles for research and for rapid, user-friendly, and cost-effective diagnostic tests. Our expertise in the manufacturing and characterization of polymers means we can offer a custom manufacturing service, all with a high level of quality...

  • Acenaphthene Standard 5000 ug/mL methanol 1X1ML

    Analyte: Acenaphthene, CAS Number: 83-32-9. EPA, Method: Individual Analyte.

  • Polymethylmethacrylate (PMMA) Individual Molecular Weight

    Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone, and ethyl acetate. They also work well with more polar organic eluents, for example...

  • Benodanil Standard 100 ug/mL methanol 1X1ML

    Analyte: Benodanil, CAS Number: 15310-01-7.

  • Dispersive Solid Phase Extraction (SPE) Kit

    QuEChERS dispersive solid phase extraction (SPE) kits supplied in 2 or 15 mL centrifuge tubes accommodate the aliquot volumes specified by current AOAC and EN methodologies. Select the dispersive kit suited to the type of food analyzed and the method followed. The sorbent extracts the sample matrix,...

  • Atomic Absorption Calibration Standard

    Agilent aqueous single element standards for AA are certified by high performance ICP-OES (HP-ICP-OES), a technique developed by the National Institute of Standards and Technology (NIST). NIST uses HP-ICP-OES to certify their SRM 3100 series of spectrometric single element solution standards. NIST...

  • gamma-BHC (Lindane) (gamma-HCH) Standard

    gamma-BHC (Lindane) (?-hexachlorocyclohexane) Standard

  • Perchlorate Standard 1000 ug/mL water (low TOC, < 50 ppb) 125ML

    Analyte: Potassium perchlorate (as perchlorate), CAS Number: 7778-74-7; InChl: YLMGFJXSLBMXHK-UHFFFAOYSA-M. EPA, Method: 314; EPA, Method: 9058.

  • MMI-L Low Concentration Tuning Mix

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Polyethylene Oxide (PEO) Individual Standard

    These hydrophilic polymers are suitable for both aqueous SEC and organic GPC using the majority of polar organic solvents. The polyethylene oxides (PEO) are available in high molecular weights, while the polyethylene glycols (PEG) cover the lower molecular weight range. The two types are chemically...

  • Matrix Spike Standard 25 ug/mL hexane 1X1ML

    Analyte: 2-Methylnaphthalene, CAS Number: 91-57-6; Analyte: Naphthalene, CAS Number: 91-20-3; Analyte: Pyrene, CAS Number: 129-00-0; Analyte: Fluorene, CAS Number: 86-73-7; Analyte: Anthracene, CAS Number: 120-12-7; Analyte: Phenanthrene, CAS Number: 85-01-8; Analyte: Fluoranthene, CAS Number:...

  • Procymidone Standard 1000 ug/mL methanol (methyl alcohol) 1X1ML

    Analyte: Procymidone, CAS Number: 32809-16-8.

  • Fenvalerate Standard

    Agilent Technologies

    Fenvalerate Standard

  • ICP-OES Standard

    Agilent Technologies

    The Agilent Technologies rhodium single element ICP-OES standard helps in delivering stable results of ICP-OES analyses of instrument calibration materials. This standard helps in obtaining precise, reliable calibrations with an accuracy level of 99.99%. Application: Single Element This product is...

  • Phthalate Standard 200 ug/mL methanol 1X1ML

    Analyte: Bis(2-ethylhexyl) phthalate, CAS Number: 117-81-7; Analyte: Butyl benzyl phthalate, CAS Number: 85-68-7; Analyte: Di-n-butyl phthalate, CAS Number: 84-74-2; Analyte: Diethyl phthalate, CAS Number: 84-66-2; Analyte: Dimethyl phthalate, CAS Number: 131-11-3; Analyte: Di-n-octyl phthalate, CAS...

  • < Previous
  • > Next

Compare Tool

Select up to 3 products