Buffer Solutions

Buffer Solutions

Products (1419)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • TAPS

    RPI (Research Products International)

    pKa(25°C): 8.4. The working pH range in aqueous solution is 7.7-9.1.

  • TAE buffer (10X), 1 L

    MP Biomedicals

    Premixed liquid, 10X concentrate. Contains 0.4M TRIS base, 0.4M Acetate, 10mM EDTA, pH 8.0. Used in agarose electrophoresis for separation of nucleic acids, DNA and RNA. Has lower buffer capacity than TBE but double-stranded DNA runs faster in TAE buffer.

  • Tris-Buffered Saline (20X, for Western Blot Washing, pH 7.4)

    Components: Tris Base / Tris-HCl(1M), Sodium Chloride(3 M) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 1-micron filter. pH: 7.4 ± 0.15 (1X) Storage: Room Temp.

  • MES Sodium Salt

    RPI (Research Products International)

    pKa (25°C): 6.15. The working pH range in aqueous solution is 5.5-6.7.

  • Tryptic Soy Broth, Sterile

    1.70% Tryptone, 0.30% Soytone, 0.25% Cerelose Anhydrous Dextrose (Glucose), 0.50% Sodium Chloride, 0.25% Potassium Phosphate Dibasic

  • LB Agar Plates with Carbenicillin-75, Sterile

    1.0% Tryptone, 0.5% Yeast Extract, 1.0% Sodium Chloride, 1.5% Agar, 75µg/ mL Carbenicillin Disodium Salt

  • Buffer Standard, pH 6.00

    Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated...

  • 10% Sarkosyl Solution, Sterile

    10% Sodium Lauroyl Sarcosine

  • Tricine

    MP Biomedicals

    Tricine, a zwitterionic buffer, was first prepared by Good for use as a buffer for chloroplast reactions. It is structurally similar to Tris, but is much less inhibitory at high concentrations. The name tricine comes from tris and glycine from which it was derived. Tricine can be used in...

  • MES Buffer (0.5 M, pH 5.5)

    Boston BioProducts

    Components: MES Monohydrate(500 mM), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 5.5 ± 0.15 Storage: 2-8°C

  • Buffer Standard, pH 8.00

    Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated...

  • Buffer Rinse Solution

    Spectrum Chemical

    Buffer Rinse Solution, In Portable Pouch, a mixture of acid and its conjugate base, is used to prevent changes in the pH of a solution. These solutions are mainly utilized to keep pH at a constant value in a variety of chemical applications. Spectrum solutions utilize the highest quality raw...

  • PIPPS 100GM

    MilliporeSigma

    PIPPS | CAS 5625-56-9 | Calbiochem | 100GM

  • Certipur® Buffer Solution, pH 12.00

    (di-sodium hydrogen phosphate/sodium hydroxide) traceable to SRM from NIST und PTB pH 12.00 (25°C) Certipur®

  • Fluka Buffer Solution pH 10.0 (20 deg C)

    Honeywell Research Chemicals

    The Fluka 10 pH buffer solution helps in the efficient calibration of pH values in chemical samples. It comes in a plastic bottle and works at a temperature of 20 degree C. The calibrating of the pH value is carried out with standard buffer solutions (related to SRM by NIST) according to DIN 19266...

  • Fluka Buffer solution pH 6.865 (25oC) with fungicide, according to DIN 19266

    Chemical name: Buffer solution pH 6.865 (25°C) Density (g/cm3): 1 UN Number:

  • CSPL Buffer

    Omega Bio-tek

    For Research Use Only. Not for use in diagnostic procedures.

  • TG Buffer (TRIS-GLYCINE) 10x Premix powder - 1PK(4L)

    The Bio Basic Inc. TG buffer (tris-glycine) 10x premix powder is suitable for laboratory and research use.

  • SIGMA Gelatin veronal buffer,

    Synonyms: GVB 2+ ; Gelatin Barbital Buffer Storage Temperature: 2-8°C Other Notes: 0.15 mM CaCl 2 , 141 mM NaCl, 0.5 mM MgCl 2 , 0.1% gelatin, 1.8 mM sodium barbital and 3.1 mM barbituric acid, pH 7.3-7.4. Aseptically filtered

  • Hepes

    MP Biomedicals

    HEPES is a zwitterionic organic chemical buffering agent; one of the twelve Good's buffers. HEPES has been utilized extensively for research and commercial applications in the cell culture and tissue culture industries. HEPES is widely used in cell culture, largely because it is better at...

  • 1M Tris-HCl, pH 8.0 Solution, Sterile

    This is a GMP-grade product that is manufactured in compliance with our Quality Management System in ISO 13485 certified facilities., 1M Tris

  • 10X RIPA Lysis Buffer

    Rockland Immunochemicals Inc

    This product is 10X concentrated stock solution. Dilute to 1X prior to use. 1X RIPA Lysis Buffer is intended for the extraction of cellular proteins for the efficient lysis of cells and solubilization of protein, while minimizing protein degradation and maintaining protein immunoreactivity and...

  • 10X Tris Buffer Saline 6 X 1 L

    Tris Buffered Saline (TBS) is an isotonic, non-toxic buffer used in some biomedical techniques to maintain pH within a relatively narrow range.  TBS can shift pH relatively dramatically as temperature changes, with the pKa declining approximately 0.03 units per degree Celsius rise in...

  • AAV·Tek™ PCR Sample Prep Kit: DNase I Treatment + Dilution Plates

    AAV·Tek™? PCR Sample Prep Kit: DNase I Treatment + Dilution Plates

  • < Previous
  • > Next

Compare Tool

Select up to 3 products