Tapes

The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point. Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use....

Wide neck easily accommodates a 50 mL pipet Superior strength, durability and heavy uniform walls ensure safety in the lab Flat interior bottoms are ideal for stirring These KimCote® volumetric flasks are graduated to Class A volumetric tolerances and are designed from ASTM Specification E288....

Tyvek IsoClean delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Bound seams are covered with garment fabric to reinforce the seam and...

K4300 vial is a direct replacement for Dionex # 055058, screw cap vial for AS-50 and AS-AP autosamplers. Our product is the same height and diameter as the OEM product. This product has a 0.012" pierce cap that is easily punctured by the sampling probe during analysis. The cap is molded of low...

Globe's plastic culture tubes are produced in polystyrene (PS) or polypropylen (PP). The dual position snap cap (LDPE) provides either aerobic or anaerobic storage of samples. Note: Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for anaerobic...

For use with WHEATON crimp top headspace vials Seals are made from aluminum for easy crimping and decapping Seals are magnetic for use with magnetic transport autosamplers

For determination of settleable matter in water and waste water Screw plug cap is virtually leak-resistant and will not snap off in the cone Of clear styrene-acrylonitrile Unit can be easily cleaned through the bottom The new Imhoff cone from Wheaton features a more intelligent design that combines...

An affordable assortment of some of the most commonly used plastic labware items. Kit consists of 20 items shipped in a plastic storage box. Contains: 100ml PP Beaker, 250ml PP Beaker, 10ml PP Graduated Cylinder, 100ml PP Graduated Cylinder, 65mm dia funnel, Drop Dispenser bottle, 4 reagent bottles,...

High visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure. 

This versatile polypropylene reservoir is useful for single and multichannel micropipettes. Positioned one way. It provides a 50 mL reservoir for use with a single channel micropipette. Flipped over, it provides a numbered reservoir with eight separate 5 mL reagent channels, and a numbered reservoir...

DWK Life Sciences (Wheaton) presents E-C Clear Sample Vials, designed for efficient sample handling and analysis. These vials offer clear visibility for easy inspection of contents. Constructed from high-quality materials, they ensure chemical resistance and compatibility with various samples. Their...

This compact shaking water bath utilizes the well proven, belt-less motor drive system from our popular Orbi-Shaker™ Series, with the addition of precision temperature control up to 80°C. The seamless, stainless steel chamber has a 12 liter capacity and includes a universal spring-loaded...

The Purair BIO Class II, Type A2 Biological Safety Cabinets (BSCs) provide a primary containment work area for life science research, cell culture processing, and other applications where protection of the user, the work product, and the environment, and mitigation of cross-contamination on the work...

Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. 5" resilient rubber casters...

Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper...

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make contact...

Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers...

Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

Built for cleanliness and stability. Seamless 14-gauge Type 304 stainless steel work surface. All worktables with overhead are 30" (70mm) wide and have rear posts that are approximately 88" (2235mm) high. Cantilever shelves for overhead models are sold separately.

OSHA signs are the perfect way to alert your employees and guests when a hazard is present in your facility. Keep your facility safe, buy an OSHA regulated sign today and prevent an accident tomorrow. These OSHA signs comply with OSHA 29 CFR 1910.151.

Low profile for greater stability, wide mouth for ease of sampling, these Clear Compound Vials are excellent for small quantities of compounds. The Lab-Pak carton includes a shrink wrapped tray of 144 Vials and a bag of 144 Green Thermoset F217 PTFE lined caps (not assembled). Green thermoset...

ASTM E11 Compliance Grade Screen Trays for Gilson Testing Screen and Test-Master® are offered in sizes from 5in to No.400 (125.0mm to 38µm). Cloth material is stainless steel for No.5 (4.00mm) and finer, and plain steel for No.4 (4.75mm) and coarser. Clear Screen area is 14.75x22.75in...

Deep-freeze thermal-transfer labels for identification of vials, tubes, freezer boxes, plastic bags (at -196°C in liquid phase and vapor phase Liquid Nitrogen, and -80°C freezers) and other containers. Designed for long-term biopreservation in laboratory deep-freeze and harsh environments....

Emphasize your safety message with the addition of an appropriate graphic. The First Aid With Graphic Signs by AccuformNMC are designed to provide clear and immediate identification of first aid locations. These signs feature high-visibility graphics to ensure they are easily seen in emergency...