Reaction Vessels

Provide positive seal Easy removal Large target area Snap caps for use with autosampler vials are designed to provide a positive seal yet are easy to remove with resorting to crimping or decapping tools. These vials are suitable for high volume, quick turnaround sampling and provide a large...

Horizontal pack Similar to 9186R20 series, but of borosilicate glass with large, matte white enamel spot for marking with pencil, wax crayon, ball- point or felt tip pens Packed horizontally in shallow trays. Case contains 4 trays of 250 tubes each. Listings show length x o.d. in mm.

Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled with...

DiluFlow® Pro automatically dilutes in seconds a solid sample with the appropriate weight of diluent with traceability. With its robotic arm and high-speed process, it offers you the best solution for your dilutions! Unique Features Ultra low profile: Only 30 cm! Perfect for a laminar flow...

Built for cleanliness and stability. Seamless 14-gauge Type 304 stainless steel work surface. Shipped knocked down and can be assembled in minutes without tools. Stationary worktables are 34" (864 mm) high with leveling feet.

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements Manufactured from 51...

OS.9013 through OS.9440 Stainless steel oven racks for our FO and VO series digital drying ovens. Each rack comes with 4 stainless steel stands to mount on the oven chamber wall. TCO-K: Thermocouple for FO Series 400°C Max Drying Ovens K-type thermocouple wire, fits our FO-29040, FO-29070,...

Inert ovens suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N2 gas into the chamber. Performance and functions Heat resistance test and heat treatment of up to 360°C Simple operation by interactive key input program operation and calibration offset...

Formaldehyde solidifier is for quick response in spill prone areas. Solidifier suppresses formaldehyde vapor as well as solidifying the material for disposal. Formaldehyde Spill Kits are designed to provide and safe and effective method of clean up and vapor reduction in small or large formaldehyde...

IBI’s BETA-GARD™ waste containers are designed for radioactive waste or any other laboratory waste that requires containment. These safe storage containers may be used with disposable NRC-approved waste bags. There are three (3) stationary waste containers available in convenient sizes with...

The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point. Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use....

Wide neck easily accommodates a 50 mL pipet Superior strength, durability and heavy uniform walls ensure safety in the lab Flat interior bottoms are ideal for stirring These KimCote® volumetric flasks are graduated to Class A volumetric tolerances and are designed from ASTM Specification E288....

Tyvek IsoClean delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Bound seams are covered with garment fabric to reinforce the seam and...

K4300 vial is a direct replacement for Dionex # 055058, screw cap vial for AS-50 and AS-AP autosamplers. Our product is the same height and diameter as the OEM product. This product has a 0.012" pierce cap that is easily punctured by the sampling probe during analysis. The cap is molded of low...

Globe's plastic culture tubes are produced in polystyrene (PS) or polypropylen (PP). The dual position snap cap (LDPE) provides either aerobic or anaerobic storage of samples. Note: Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for anaerobic...

For use with WHEATON crimp top headspace vials Seals are made from aluminum for easy crimping and decapping Seals are magnetic for use with magnetic transport autosamplers

For determination of settleable matter in water and waste water Screw plug cap is virtually leak-resistant and will not snap off in the cone Of clear styrene-acrylonitrile Unit can be easily cleaned through the bottom The new Imhoff cone from Wheaton features a more intelligent design that combines...

An affordable assortment of some of the most commonly used plastic labware items. Kit consists of 20 items shipped in a plastic storage box. Contains: 100ml PP Beaker, 250ml PP Beaker, 10ml PP Graduated Cylinder, 100ml PP Graduated Cylinder, 65mm dia funnel, Drop Dispenser bottle, 4 reagent bottles,...

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000...

This versatile polypropylene reservoir is useful for single and multichannel micropipettes. Positioned one way. It provides a 50 mL reservoir for use with a single channel micropipette. Flipped over, it provides a numbered reservoir with eight separate 5 mL reagent channels, and a numbered reservoir...

DWK Life Sciences (Wheaton) presents E-C Clear Sample Vials, designed for efficient sample handling and analysis. These vials offer clear visibility for easy inspection of contents. Constructed from high-quality materials, they ensure chemical resistance and compatibility with various samples. Their...

This compact shaking water bath utilizes the well proven, belt-less motor drive system from our popular Orbi-Shaker™ Series, with the addition of precision temperature control up to 80°C. The seamless, stainless steel chamber has a 12 liter capacity and includes a universal spring-loaded...

The Purair BIO Class II, Type A2 Biological Safety Cabinets (BSCs) provide a primary containment work area for life science research, cell culture processing, and other applications where protection of the user, the work product, and the environment, and mitigation of cross-contamination on the work...

Easy "no-tool" shelf adjustment. Shelves can be repositioned at precise 1" (25mm) increments along the length of the numbered posts. Open-wire design minimizes dust accumulation, allows a free circulation of air, and greater visibility of stored items. 5" resilient rubber casters...