Flasks, Evaporating

Foxx Life Sciences Erlenmeyer Shaker Flasks are molded from virgin, optically clear, non-leaching polycarbonate resin that complies with stringent FDA and USP requirements. Our flasks can be used for cell cultures, microbial cultures, media preparation and storage. Flasks are available in 1liter and...

Polymethylpentene (PMP) and polypropylene (PP) Erlenmeyer flasks are an excellent break-resistant alternative to glass. Screened on graduations of approximate volumes. Compatible with standard taper joint stoppers. Supplied with matching PP screw caps.

Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included.

Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw caps. The 10 mL size allows for accurate measurement of small volumes. • Screw cap • Meets Class B per DIN EN IOS 1042...

Calibrated "to contain" at 20°C, the upper neck of these borosilicate glass flasks are enlarged to permit easy introduction of solids. Each flask is provided with a marking spot in addition to a serial number. NOTE: Supplied with Certificate of Compliance

Erlenmeyer flask, heavy wall, with a standard taper joint. Ideal for rigorous laboratory applications, this Heavy Wall Erlenmeyer Flask is designed to withstand intense heat and repeated use. Its superior construction offers enhanced durability, making it a reliable choice for scientific experiments...

SYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.

KIMAX flask with a screw-thread finish. Used to mix and store culture media, and in other culturing techniques. Included are long caps with cemented-in white rubber liners, not attached. Designed from ASTM Specification E1404, Type III.

Heavy glass, without side tubulation ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy wall for strength...

Single neck flask with a Standard Taper outer joint Tops are reinforced and tooled with a rounded finish, containing more glass to give them maximum mechanical strength Body is thick-walled, with a long tapered outside contour to minimize chipping when struck or rubbed together White ceramic enamel...

With outer joints with side necks angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Round bottom, three neck flask with angled sides. All joints are standard taper. Available in standard and heavy wall.<

These borosilicate glass graduated neck flasks come in sizes to supplement our official metric series, LG-4317. Additional sizes can be supplied on request. Calibrated "to contain" at 68°F/20°C.

KIMAX® boiling flask with a short Standard Taper joint neck. Designed from ASTM Specification E1403, Type I, Class IV requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Ai 24/40 standard taper joint, heavy wall oval-shaped, round bottom flask. These Heavy Wall Oval-Shaped Round Bottom Flasks are designed to provide superior durability and performance in laboratory settings. The oval shape enhances stability while the heavy wall design ensures resistance against...

KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.

Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.

Calibrated both "to contain" and "to deliver" (top line). Graduation rings and marking spot are blasted onto glass. ground glass stopper is supplied with the flask. Designed from ASTM Specification E288, Class A unserialized requirements. Replacement ground glass stopper is...

Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,...

RAY-SORB® processed to protect materials sensitive to the light of shorter wavelengths Less than 1% transmission below 400 nm and approximately 5% transmission from 400-600 nm Without a capacity scale Standard Taper PTFE stopper is supplied with the flask Replacement stopper is 41901R Designed...

Heavy wall filtering flask includes a bolt neck with tubulation. Borosilicate glass flasks are designed to give the best combination of thermal shock resistance and physical strength. Feature heavy-duty rims and printing in durable white enamel.

Wide Mouth, conical flask made of polypropylene. Comes with a screw cap, or can be used with a stoper. Chemical resistant and autoclavable to 120 degrees C. Graduated in easy to see green print

Designed for use with rotary and reciprocating shakers Plain, fire-polished finish All necks are 38 mm o.d. Baffle indents provide greater turbulence to improve oxygen transfer rates or aeration.

TriForest Erlenmeyer Shaker Flasks are manufactured with virgin, optically clear, non leaching LEXAN® Polycarbonate resin that retains clarity after gamma radiation. The flasks are certified pyrogen free, DNase/RNase free, ideal for cell cultures, microbial cultures, plants, media preparation,...

Round bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced...