Filters, Centrifugal

Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass...

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28 mm Basis...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a very low binding capacity for...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they are ideal for the filtration of...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for filtration of aqueous or...

6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000 mL...

I.W. Tremont offers a diverse product line of high quality membrane filters available in a variety of materials, diameters and pore sizes and suitable for a wide range of applications including cell retention, In Vitro Diagnostics, particle collection, clarification and sterile filtration of aqueous...

Ahlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to...

Depth filtration glass micro fiber GRADE B - Fine porosity, medium to fast flow rate, with a 1.0 µm size particle retention. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. This material is twice as thick as Grade A with a higher loading...

Depth filtration glass micro fiber GRADE F - Fine porosity, medium flow rate, with a 0.7 µm size particle retention. Frequently used with Grade D to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for TCLP...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use as a prefilter in series with...

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm Filtration speed:...

Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and...

Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.

Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and...

ProWeigh® Filters are 1.5µm Binderless Glass Fiber Filters with all preparation steps done for you. All ProWeigh filters are prepared according to Standard Methods requirements. 47mm binderless glass fiber filters are weighed, washed 3 times in deionized water, dried at 105C and weighed to...

Ahlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to...

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Hydrophobic PTFE Membrane is compatible with more...

•  3mm, 13mm, 25mm, 50mm •  0.10µm to 1.20µm •  Minimal sample hold-up •  High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm...

mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum throughput...

The interpretations by various auditors of the requirements of prepared filters for TSS and VSS analysis often differ from one regulatory body to the next. ProWeigh® Double filters from Environmental Express strictly document ALL preparation steps outlined in Standard Methods 2540D and E for...

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10 bar)...

Variable fill and dispense speeds Lighter, more compact than competing units Easy to operate Nine independently controlled fill and empty speed range options for liquids of varying viscosities. Fill and dispense both have fast, medium and slow settings. Can be used with glass and plastic serological...

Xenosep Technologies offers the Xenomax® 1664A Solid Phase Extraction Filters, an essential tool in the purification and separation of complex mixtures. These filters aid in the extraction of particular components from liquid samples, providing clear, reliable results necessary for further analysis....